AURA | wall light E14 & E27
The AURA wall light provides a bright but diffuse glow thanks to its wicker pattern. Perfect as an accent light in your living room, or by your bedside.
Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)
You can get the power cords from Amazon here: For Europe: E27 cord: https://amzn.to/3OVrZjK For the US: E26/E27 cord: https://amzn.to/3U0Xyvy
Happy printing!
DIMENSIONS | W 254 mm x H 254 mm x D 76.5 mm
PRINTING | 5h
V2 UPDATE: Lamp now available for E14 and E27. I also modified the mesh and the frame for cleaner, stronger printing.
3D PRINT SETTINGS The shade prints upright without supports or brim. The wall-mounting bracket prints on its back face. The STL files are all already oriented properly.
For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty.
Layer height: 0.3mm/layer Wall line count: 2 Build adhesion type: None Supports: None Infill: 40 to 50%