HOUSE FOR CAT TAO LOW POLY V1 - Follow us: linktr.ee/catalpine

Crafted with precision in France, this cat house is the result of meticulous design aimed at providing your pet with a snug haven, ensuring comfort and security during its essential rest hours. Beyond its primary function, this kennel is conceived to be a genuine decorative piece for your home, seamlessly meeting both your aesthetic preferences and your pet's needs.

To replicate this cat house at a 1:1 scale in one go, consider utilizing a high-volume printer like the Creality CR10 5s, Tronxy X5, or Wanhao Duplucator 9.

For those without a large-format printer, printing in several parts is also an option using a 200 x 200 x 200 mm printer, with subsequent assembly through gluing.

Should you possess a large-format printer and choose to print in parts, you can even construct a kennel measuring up to 1 meter wide by 80 cm high – a perfect haven for larger cats or even dogs.

Should your pet be on the smaller side, scaling down is possible, but we recommend not going below 70% of the original size to maintain an adequately sized opening. At 70%, the entrance will measure 129 x 123 mm.

Please note that the design is protected by copyright, and downloaded files are for personal use only. If you intend to use the designs for commercial purposes, kindly reach out to us.

Follow us: https://linktr.ee/catalpine

The cat house can be printed as a single piece or in multiple parts, catering to your printer's size. Optimal printing settings for a quality outcome include a 0.4 mm nozzle, 0.2 mm layer height, 0.8 mm wall thickness, 0.8 mm top/bottom thickness, 6% filling density, and no support. For an enhanced finish, align the Z-seam on one edge.

For the best rendering and assembly precision, we recommend printing the parts in the same position as indicated on the supplied STL file, using a raft for multi-part printing and possibly rotating the part around the Z-axis to fit on the platen, depending on your printer's size.