[Uploaded by Thangs Sync]

This is the Boro Edition of the 4 Base Atomiser stand, has the same Atomiser Bases but adds 4 Boro Tank holders on the front

4 Base Stand w- Leak Protection Boro Edition.stl

Version one of a Fightstick/Hitbox i'm working on, Instructions for assembly are included in the download (if downloaded before they were added, redownload the model to get them.)

YOU WILL NEED:

=== BODY ===
- 9x M4 Heat-Set Inserts
- 9x M4x8mm Socket Head Screws
- 4x 16mm Momentary Swtiches
- 1x USB-C Female to USB-A Female adapter
- 1x USB Encoder board of your choosing

=============================

=== JOYSTICK LAYOUT PARTS ===
- 1x 8-way Joystick
- 4x M5x14 Socket Head Screws
- 8x M5 Nuts (to secure the Joystick, 2 on - each screw)
- 8x 30mm Arcade Buttons

=============================

=== HITBOX LAYOUT PARTS ===
- 11x 24mm Arcade Buttons
- 1x 30mm Arcade Button

===========================

I have included the .3mf to allow for easier remixing of parts.

Custom Arcade Fightstick

Bottom Left.stl

Bottom Right.stl

Top Left.stl

Top Right.stl

Custom Modular Fightstick.3mf

Top Left (Hitbox).stl

Top Right (Hitbox).stl

Top Right (Viewlix 8).stl

The F56's sun visors are oddly shaped. They're thinner closer to the door and thicker closer to the centre of the interior. In addition, it's hard to use the many designs already out there because the vanity mirrors get in the way. While other designs don't fit the thicker interior side properly and bend out of shape, this design takes the odd proportions of the sun visor into account and will not bend over time.

MATERIALS:
ABS is the best choice for this clip. A car's interior, depending on where you live, can reach temps up to the high 60C range, and ABS is both durable and temperature resistant. PETG is the minimum recommended quality plastic for this clip.

Mini F56 (Gen 3) Sunglasses Visor Clip

The F56's sun visors are an odd shape, they're thinner closer to the door, and thicker closer to the centre of the interior, and because both sides have a Vanity Mirror, its had to use the many designs already out there, as they don't fit the thicker side properly and end up bending out of shape, this one has been designed with the thick side in mind.

MATERIALS:
PETG is the minimum i'd print this out of, as a car's interior, depending on where you live, can reach temps in the high 60C range. ABS would be the best if you have a setup that allows you to print ABS.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Cabooshy

Achievements

Seedling

Explorer