This is a building block for creating objects that mount to a 4040 Aluminum Extrusion. I use this to create attachments to the base of an Ender 3 type of printer.

Import this into Tinkercad or any CAD software and connect it to the design you want to mount to your 3D Printer.

4040_Mount.stl

This is a building block for creating objects that mount to a 4040 Aluminum Extrusion. I use this to create attachments to the base of an Ender 3 type of printer.

This mounts to a 4040 rail to hold your 10oz spray bottle of IPA. It fits perfectly behind the display on an Ender 3 V2.

10oz IPA Spray Holder for Ender 3 V2 Style Printer

I created this KCup Stand for Filament Friday Video 5 years ago. It worked well for many years.
Here is the classic Filament Friday Video:

https://youtu.be/1lyMZxdIIGU

CHEP KCup Coffee Pods Stand

I created this for this Filament Friday Video 5 years ago. It worked well for many years.

https://youtu.be/1lyMZxdIIGU

KCup Coffee Pods Stand

This is the End cap for the BASS Board. More details here: https://youtu.be/1Rxw9UJjlx8

You'll also need these parts:

https://thangs.com/CHEP/CHEP-Universal-Building-Block-24184

https://thangs.com/CHEP/CHEP-Bass-Board-Head-Block-24187

CHEP Bass Board End Cap

Use this for the head of the Flexible Bass Board. More details here: https://youtu.be/1Rxw9UJjlx8

You'll also need these parts:

https://thangs.com/CHEP/CHEP-Universal-Building-Block-24184

https://thangs.com/CHEP/CHEP-Bass-Board-End-Cap-24310


CHEP Bass Board Head Block

Use this for the head of the Flexible Bass Board. More details here: https://youtu.be/1Rxw9UJjlx8

You'll also need these parts:


This 3D printed block can be snapped together with itself. Just print more and you can snap them together to make a flexible chain of 1" blocks. In fact, I used them to make a Bass Board to measure fish length in fishing tournaments. What could you make with these blocks?

More details are here: https://youtu.be/1Rxw9UJjlx8

Bass Board Pieces:

https://thangs.com/CHEP/CHEP-Bass-Board-Head-Block-24187

https://thangs.com/CHEP/CHEP-Bass-Board-End-Cap-24310



CHEP Universal Building Block

This 3D printed block can be snapped together with itself. Just print more and you can snap them together to make a flexible chain of 1" blocks. In fact, I used them to make a Bass Board to measure fish length in fishing tournaments. What could you make with these blocks?

More details are here: https://youtu.be/1Rxw9UJjlx8



This is the Bottom section of the two color PTFE cutter Chuck Hellebuyck (CHEP) showed on his Filament Friday YouTube show. The top section can be found here: 
https://thangs.com/CHEP/CHEP-2-Color-PTFE-Cutter-Top-Section-23765

Full PTFE (non 2-color):
 https://thangs.com/CHEP/CHEP-PTFE-Cutter-and-Measurement-Tool-23507

More details are here: https://youtu.be/pQlZoMF0CVE

CHEP 2-Color PTFE Cutter Bottom Section (2 of 2)

This is the Bottom section of the two color PTFE cutter Chuck Hellebuyck (CHEP) showed on his Filament Friday YouTube show. 

CHEP 2 Color PTFE Cutter Bottom Section

This is the top section of the two-color PTFE cutter Chuck Hellebuyck (CHEP) showed on his Filament Friday YouTube show. You will also need the bottom half to complete the print. You can find the Bottom section here: https://thangs.com/CHEP/CHEP-2-Color-PTFE-Cutter-Bottom-Section-23767

More details are here: https://youtu.be/pQlZoMF0CVE

CHEP 2-Color PTFE Cutter Top Section (1 of 2)

This the top section of the two-color PTFE cutter Chuck hellebuyck showed on his Filament Friday YouTube show. You will also need the bottom half to complete the print. 

CHEP 2 Color PTFE Cutter Top Section

This is a PTFE tube cutter with measurement scale for short pieces to put in a Creality Hot End or a Prusa Mini. You slide in the PTFE up to a specific length and then cut it.
Or slide a long section in and it's held at both ends so you can get a clean straight cut.

I use an exacto knife to cut the tubing in the slot but you can use any razor blade as well.

It's also 100 mm long so you can use it to mark filament when testing for E-Step calibration of the Extruder.

You can also print this in 2-Colors to make it easier to read the numbers. There are two files; a top section and a bottom section. You can find them here:
Two-Color Top Section: https://bit.ly/3jOk8E7
Two-Color Bottom Section: https://bit.ly/3xBw3Kw

More details are here: https://youtu.be/pQlZoMF0CVE

CHEP PTFE Cutter and Measurement Tool

This is a PTFE tube cutter with measurement scale for short pieces to put in a Creality Hot End or a Prusa Mini. You slide in the PTFE up to a specific length and then cut it.
Or slide a long section in and it's held at both ends so you can get a clean straight cut.

I use an exacto knife to cut the tubing in the slot but you can use any razor blade as well.

It's also 100 mm long so you can use it to mark filament when testing for E-Step calibration of the Extruder.

PTFECutter.stl

I designed my own 20mm x 20The Images are from a print on my Ender 3.
mm x 20mm Calibration Cube in Tinkercad so I had my own test print for reference.
I call it the CHEP Cube.
It’s become a popular print for many people and it’s fun to see where it turns up.

CHEP Cube

CHEPCube.stl

Support my work and join to get access to my books on Electronics such as Arduino and Microchip PICs and other Electronics, plus many 3D print STL files and many of my popular Cura Profiles.
I'll be adding more member only content monthly.

CHEP_10

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow