What's not to love about pandas?
For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:

www.patreon.com/bottega3d

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.

NOZZLE DIAMETER: 0,4 mm.
LAYER: 0.15 or 0.16
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO

LOVE ME PANDA

please dawnload zip.stl

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

Please read pdf for full instruction.
For personal use only
This dragon is very easy to print. In my opinion best size is 120%.
I printed with bambulab at a high quality setting and a 0.16 layer.
I use the brim for safety, but in the large version it may not be necessary.
Good calibration and retraction is necessary for a great result.

For personal use only
All my files are protected by Copyright, should NEVER be shared, resold or remixed.
To legally sell physical print of my design visit: www.bottega3d.com

Good calibration and retraction is necessary for a great result.
AMS/MMU READY: you can use “SMART FILL ANGLE”, easy!

Yuari Baby Magical Dragon

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

LOVELY is a cute articulated little dragon. It is printed in place and doesn’t require supports.

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

NOZZLE: 0,4 mm.

LAYER: 0.16 or less

OUTER WALLS: 3

INFILL: 10%

SUPPORTS: NO

Z-HOP: 0,4 – 0,8

For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit: PATREON

Lovely Tiny Dragon

A cute articulated sea turtle. Print-in-place and doesn’t need supports to be printed.
For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.
To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:

www.patreon.com/bottega3d

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.

Please note: After painting the eyes, I filled them with uv resin.

NOZZLE DIAMETER: 0,4 mm.
LAYER: 0.15 or 0.16
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO


Sea turtle articulated

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my PATREON:
https://www.patreon.com/Bottega3D

Get to know me on social:
Instagram: instagram.com/bottega.3d
Designing this tile kit to assemble a diorama was exciting.

I became a child again and played with it a lot now that I was testing it.

Challenging but satisfying.

I printed 3 of each type (a few more tree bases) and it is a great kit to sell.

More kits and more dinosaurs are coming next month.

I hope you appreciate my wanting to be a little original and come up with new ideas for kids and to sell in your markets.

-------------------------------------------------------------------------------------------

Settings: LAYER: 0.20 - OUTER WALLS: 2 - INFILL: 15% - SUPPORTS: NO

Instruction and Tips:
Printed with bambulab at a high quality setting and a 0.20 layer.
Good calibration and retraction is necessary for a great result.

Glue is needed to assemble the tree trunk and canopy


Build your Jurassik-rama kit 01 + Terra, baby triceratops

CIAO, thank you for visiting my bottega. (It is an Italian term for old craft stores and the like).
Here you will find a wide variety of things, because I love to experiment. I like to create articulated creatures, props, fun gadgets, home decorations and more.
My 3D printed models aim to preserve the essence of handmade creation, trying to replicate the clay or modeling dough we used as children.
I look forward to meeting you in my community!
social tag: @bottega.3d

Click [HERE ](https://discord.gg/SPvpC7Ds7B)for Discord Server

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Bottega3D

Achievements

Seedling

Fan Favorite

Pinned models

Lovely Tiny Dragon

Yuari Baby Magical Dragon

Sea turtle articulated

Build your Jurassik-rama kit 01 + Terra, baby triceratops

LOVE ME PANDA

Yuari Baby Magical Dragon

Lovely Tiny Dragon