Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

Hello beautiful people! Today I am happy to introduce you to my Red Panda!

This is a 100% print in place and requires no supports.

I have included:
Standard version, with realistic eyes.
Mini and smaller version.
Keychain version.
Resin version, with realistic eyes.

 There are also pre-painted 3MFs of all versions, for those who want to print them in multicolor!

I hope you enjoy them!
3D printing settings

Settings:

LAYER: 0.16 - 0.12 - OUTER WALLS: 3 - INFILL: 10% - SUPPORTS: NO – ZHOP: 0.8 – BRIM: if necessary

Instruction and Tips:
Printed with bambulab at a high quality setting and a 0.16 layer.
Good calibration and retraction is necessary for a great result.


Red Panda, articulated, flexi

please dawnload zip.stl

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my PATREON:
https://www.patreon.com/Bottega3D

Get to know me on social:
Instagram: instagram.com/bottega.3d
Designing this tile kit to assemble a diorama was exciting.

I became a child again and played with it a lot now that I was testing it.

Challenging but satisfying.

I printed 3 of each type (a few more tree bases) and it is a great kit to sell.

More kits and more dinosaurs are coming next month.

I hope you appreciate my wanting to be a little original and come up with new ideas for kids and to sell in your markets.

-------------------------------------------------------------------------------------------

Settings: LAYER: 0.20 - OUTER WALLS: 2 - INFILL: 15% - SUPPORTS: NO

Instruction and Tips:
Printed with bambulab at a high quality setting and a 0.20 layer.
Good calibration and retraction is necessary for a great result.

Glue is needed to assemble the tree trunk and canopy


Build your Jurassik-rama kit 01 + Terra, baby triceratops

**Please note: brim and zhop are recommended.**

I am proud and happy to introduce MORTE. A dragon necromancer, capable of manipulating the life and death of creatures. Guardian of the underworld, lord of the undead, general of the dragon army.

MORTE is one of the dragons that best represents me, immediately entering the top ten of the articulated dragons I like best.

The wings can also stay upright thanks to a small clutch in the mechanism, plus they can be folded with a heat gun to give it an even creepier shape.

Two versions are available, with and without legs. Your choice.

I love it, you may have already figured it out. I hope you like it too.

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my patreon!
https://www.patreon.com/Bottega3D
Get to know me on social:
Instagram: instagram.com/bottega.3d
Settings: LAYER: 0.16 - OUTER WALLS: 3 - INFILL: 15% - SUPPORTS: NO - Z-HOP: 0.8 - BRIM: raccomanded

Instruction and Tips:

Printed with bambulab at a high quality setting and a 0.16 layer.

MORTE, the necromance dragon! 

Happy to introduce Eldrin.

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

Settings: LAYER: 0.16 OUTER WALLS: 3 INFILL: 15% SUPPORTS: NO Z-HOP: 0,8 BRIM: If necessary

Eldrin, Ancient scale Dragon

This dragon is very easy to print. Being a "massive" model, it can be scaled down and printed on mini printers.
Long and short versions are available, with rings on the face and not, and a preset scaling for minis.
I printed with bambulab at a high quality setting and a 0.20 layer; the mini version, however, is printed at 0.16.
The long version was printed in about 13:30 hours, the short in about 10:30 hours, and the mini in less than 10 hours.
I use the brim for safety, but in the large version it may not be necessary.

Good calibration and retraction is necessary for a great result.

AMS/MMU READY: you can use “SMART FILL ANGLE”, easy! Watch the video tutorial in folder!

NOZZLE: 0,4 mm.
LAYER: 0.16
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO
Z-HOP: 0,8

For personal use only
All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit my Patreon.


Eras, dragon of forgotten ages - articulated

Mogan and EGG

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

Designed for kids, fun for adults too, this diorama building set and its first dinosaurs make the perfect gift! Included a mini triceratops!
More sets and more dinosaurs are on the way, so don't miss the first set pieces
3D printing settings

Settings: LAYER: 0.16 - OUTER WALLS: 3 - INFILL: 10% - SUPPORTS: NO - Z-HOP: 0.8 - BRIM: YES

Instruction and Tips:

Printed with bambulab at a high quality setting and a 0.16 layer.

Good calibration and retraction is necessary for a great result.

AMS/MMU READY: you can use “SMART FILL ANGLE”, easy!

Mogan, the wood baby dragon and Egg 

What's not to love about pandas?
For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:

www.patreon.com/bottega3d

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.

NOZZLE DIAMETER: 0,4 mm.
LAYER: 0.15 or 0.16
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO

LOVE ME PANDA

SAREM is an articulated Fairy Fish. It is printed in place and doesn’t require supports. If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write m

For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:

www.patreon.com/bottega3d

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.

NOZZLE DIAMETER: 0,4 mm.
LAYER: 0.15 or 0.16
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO



Sarem, articulate fairy fish

A cute articulated sea turtle. Print-in-place and doesn’t need supports to be printed.
For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.
To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:

www.patreon.com/bottega3d

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.

Please note: After painting the eyes, I filled them with uv resin.

NOZZLE DIAMETER: 0,4 mm.
LAYER: 0.15 or 0.16
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO


Sea turtle articulated

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

Please read pdf for full instruction.
For personal use only
This dragon is very easy to print. In my opinion best size is 120%.
I printed with bambulab at a high quality setting and a 0.16 layer.
I use the brim for safety, but in the large version it may not be necessary.
Good calibration and retraction is necessary for a great result.

For personal use only
All my files are protected by Copyright, should NEVER be shared, resold or remixed.
To legally sell physical print of my design visit: www.bottega3d.com

Good calibration and retraction is necessary for a great result.
AMS/MMU READY: you can use “SMART FILL ANGLE”, easy!

Yuari Baby Magical Dragon

Important copyright information:
For commercial use and sale of prints of the designs, I invite you to join my lovely Patreon community.
https://www.patreon.com/Bottega3D

Instagram: https://www.instagram.com/bottega.3d

LOVELY is a cute articulated little dragon. It is printed in place and doesn’t require supports.

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

NOZZLE: 0,4 mm.

LAYER: 0.16 or less

OUTER WALLS: 3

INFILL: 10%

SUPPORTS: NO

Z-HOP: 0,4 – 0,8

For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit: PATREON

Lovely Tiny Dragon

CIAO, thank you for visiting my bottega. (It is an Italian term for old craft stores and the like).
Here you will find a wide variety of things, because I love to experiment. I like to create articulated creatures, props, fun gadgets, home decorations and more.
My 3D printed models aim to preserve the essence of handmade creation, trying to replicate the clay or modeling dough we used as children.
I look forward to meeting you in my community!
social tag: @bottega.3d

Click [HERE ](https://discord.gg/SPvpC7Ds7B)for Discord Server

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Bottega3D

Achievements

Seedling

Fan Favorite

Pinned models

Lovely Tiny Dragon

Yuari Baby Magical Dragon

Sea turtle articulated

Build your Jurassik-rama kit 01 + Terra, baby triceratops

Red Panda, articulated, flexi

Build your Jurassik-rama kit 01 + Terra, baby triceratops

MORTE, the necromance dragon!

Eldrin, Ancient scale Dragon

Eras, dragon of forgotten ages - articulated

Mogan, the wood baby dragon and Egg

LOVE ME PANDA

Sarem, articulate fairy fish

Sea turtle articulated

Yuari Baby Magical Dragon

Lovely Tiny Dragon