The world isn't ready for Steampunk Deadpool! - Set of bookmarks
byBooneCo3dExtra model set for tonight - It is Steampunk Deadpool!! For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: pLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Lemon Yellow At layer #17 (1.44mm) swap to Jade White for the rest.
Categories:
2 Likes4 DownloadsNovember 13, 2024