The brilliance of the Golden Dragon - Friday upload set of bookmarks

These bookmarks are made available to anyone till this next Friday when they will be pulled into the membership section.

For the models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Orange At layer #11 (0.96mm) swap to Lemon Yellow At layer #19 (1.6mm) swap to Ivory White for the rest.