The artistic beauty of the fair cardinal - set of bookmarks

Week 30 set 1 - three depictions of a cardinal resting.

For these models:

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Dark Red At layer #20 (1.68mm) swap to Ivory White for the rest.