Week 10 collection starts with a different look at the Lion. Double exposure to see the savannah in a different view.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #14 (1.2mm) swap to Orange
At layer #18 (1.52mm) swap to White for the rest.
