The Fantasy Thief - Silent stalker from above and below - Set of Bookmarks

Week 18 for the members group in upon us. First set this week is a dungeons and dragon character style of the rogue or thief.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue Gray At layer #9 (0.8mm) swap to Ash Gray At layer #12 (1.04mm) swap to Jade White for the rest.