The Energy of the Fire Mage - Part 3 of a 3 part series
byBooneCo3dBonus art this week. This is the third of 3 pieces depicting a Fire Mage and her dance with the sword. Use of 5 colors.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to Beige for the rest.