Week 16 starts off with a fun set of bookmarks. The animal adventurers have their portrait taken as they begin their journey through the labyrinth.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.9x200mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #9 (0.8mm) swap to Beige
At layer #17 (1.44mm) swap to Jade White for the rest.
