Week 15 - Some nature. Little birds have a lovely view of the world.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x204.81mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Tough Lavender Blue Transmission Distance: 2
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA Default White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Lavender Blue
At layer #12 (1.04mm) swap to Sakura Pink
At layer #17 (1.44mm) swap to White for the rest.