Week 17 is here. First set I am sharing is a set of fanart based bookmarks. They are of Luke, Leia and Darth Vader but in a very Art Deco style.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to Beige for the rest.