Jack and Sally from Nightmare Before Christmas - Fanart Clockface

Had some issues with the prior copy of this so decided to fix that an upload a new clean version of this model. This one has the hole removed as a number of people had issues with the original.

As everyone knows, this is Beloved Jack and Sally and I placed them in a clockface so they can be viewable year round.

for this model:

For this Model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.20mm) swap to Beige At layer #19 (1.60mm) swap to Ivory White for the rest.