Fanart Set of Bookmarks for the Novel Fourth Wing By Rebecca Yarros
byBooneCo3dThis bonus set was a member request. Though not exactly as the front cover of the novel, I went with a style that is similar.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.56x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Beige At layer #18 (1.52mm) swap to Jade White for the rest.