Bonus set of bookmarks for week 10. Fanart of Dr. Strange. Drawings depicting him walking down the endless stairs of time. Fun one to work with the two colors in hueforge.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 65.03x205mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Marine Blue
At layer #8 (0.72mm) swap to Black
At layer #12 (1.04mm) swap to Scarlet Red
At layer #14 (1.2mm) swap to Jade White for the rest.