Dungeon and Dragons Adventurers ready for the depths - set of bookmarks

Week 15 - First set this week is of a group of adventurers. They are set ready to delve deep into the labyrinths.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.9x200mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Dark Blue At layer #11 (0.96mm) swap to Pink At layer #15 (1.28mm) swap to Jade White for the rest.