Cute Unicorn Playing in his own little World - Set of Bookmarks
byBooneCo3dBonus for November members - Cute Drawings of a Unicorn messing around.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 70.23x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Grass Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Pink At layer #16 (1.36mm) swap to Grass Green At layer #21 (1.76mm) swap to Jade White for the rest.