Celtic Stone Crosses with Knotwork Carvings - Set of 6 Bookmarks

This set it different as there are 6 bookmarks included. All are of Ancient Celtic Crosses carved with knot work designs. 3 are square (full) bookmarks and 3 are cut outs of the stone carvings only (No background).

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 83.78x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to Jade White for the rest.