Celtic Knotwork Designs centered on the Wolf - Set of 3 Bookmarks

Another Free model for all. This is a redone model I did in the past. It is of Celtic Wolves and has been made thicker and a little more saturated color wise.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 98x294mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Dark Grey Transmission Distance: 1 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab White Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Dark Grey At layer #13 (1.12mm) swap to Gray At layer #19 (1.6mm) swap to White for the rest.