Carvings of the Ancient Celtic Dragons Guard the door - Set of Bookmarks

Week7 - After the popularity of a prior set of bookmarks on Makerworld, I created these to complement. The dragon guards the doors in these celtic knot designs.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Brown At layer #10 (0.88mm) swap to Beige At layer #18 (1.52mm) swap to White for the rest.