Art Piece - The Starry Night Meets the Wizard in the Fantasy World

Wanted to get a couple piece of art out as bonuses - This one turned out pretty cool. Mix of topics with starry night and a fantasy scene.

Couple changes for this one. 1st there is a frame on it and it is printed with the picture. If it is a problem let me know. 2nd is that I used a 5th color. I think I will be doing this a little bit more often. Let me know your thoughts.

For this Model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

The Model is 160x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #6 (0.72mm) swap to Blue At layer #10 (1.04mm) swap to Ice Blue At layer #15 (1.44mm) swap to Yellow

Border Only Colors from here until the end. At layer #18 (1.68mm) swap to White for the rest.