Art Piece - The Painted Rose

Another extra for membership. This one is a beautiful print!

For this Model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

The Model is 160x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #5 (0.64mm) swap to Scarlet Red At layer #9 (0.96mm) swap to Ash Gray At layer #11 (1.12mm) swap to Jade White for the rest.