#summer
This is to be used for the revised Part/file "Truck Clip on Sun Visor Extension". This little Nub Gets Glued in Place into the corresponding recess at the end of the main pull out Slider "Inside Slider Extension" in above mentioned file. Printing this separately allows you to print the main Slider mentioned above dead flat on its back and then just super Glue this Nub into place before assembly.. 

Slider Locking Nub.step

#summer
Clips onto any Visor, has Internal Slider that pulls out 6.5" to make up for OEM short visor lengths when vehicle visor is Swiveled/positioned against door Window.. Eliminate that gap when the sun hits you just right and blinds you around sun set...
Update 08/02/21:... I forgot to remove that little locking Nub on the end of the Blue Pull Out visor. That little nub was meant to print separately and then glued in place in the designated notch/recess to locate it. It was made  separate for printing purposes only which would allow printing this main Blue Pullout Visor Panel dead flat on its back with no supports needed.. I have updated the "Inside Slider Extension" part with the corrected recess. You can also get the little nub to Glue into that Recess under the separate file "Slider Locking Nub.step" in my model list...

Truck Clip on Sun Visor Extension

Truck Sun Visor Extention Pulled Out.step

#summer

 3D Printer Tools, Glues, Grease, Gauges, exacto knife, Flashlight holder etc. used for 3D Printers.

Main Printer Tool Holder.step

#summer

 3D Printer Tool, Glue, Grease, Gauges and Flashlight holder used for 3D Printers

#summer

Standard printable garden hose thread attachment to get water deep to the roots of Veggies or Plants, particularly useful for the newly planted ones to get the first good deep soak...

Garden Hose Root Watering Attachment.step

#summer

Standard printable garden hose thread attachment to get water deep to the roots of Veggies etc....

10-24 Nut 91841A011 McMaster Carr

Bottom Container.step

10-24 Bolt 97654A142 McMaster Carr.step

Top Twist Cap .step

Mounting Plate.step

10-24 Nut 91841A011 McMaster Carr.step

#summer

Garden Fire Hose Nozzle Assembly:

Update 08/07/21: All Individual parts added for Printing and part numbers to purchase hardware through McMaster Carr...

2nd Update 08/09/2021:  McMaster Carr Part Number for the 2ea "O_Ring_McMaster Carr" part is part# 9452K85.. Dimensions are 0.103" Width, 1.049" ID, and 1.255" OD...

Full Nozzle Assembly.step

Bottom_Handle.step

Top_Center_Plug.step

Top_Outer_Handle.step

O_Ring_McMaster_Carr_#9452K85.step

Bolt_McMaster_Carr_#97654A350.step

10-24_Nut.step

Garden Firehose Nozzle

Top Outer Handle.step

#summer
 Outside Door Mounted Holder for Replaceable Rolls of Dog Waste Bags with easy tear bag separator Nub. 4 Place holder for small American Flags for marking where the Dog left his business for future pick up...

Dog Waste Bag and Flag Holder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

BillyWho