Demo Gif: https://imgur.com/a/O2yUZl0

This is a docking station / charging dock for the Antilion ModMic. This works nicely if you're using the charging cable that came with the ModMic. If you use a different charger, just tweak the Door piece extrusion thickness - you shouldn't need to print a whole new docking station. I tried to make this easy to modify.

There are 3 Pieces:

1. The Dock itself
2. The "Door": The 'L' looking piece, will fit nice and snug on the back. This extrudes into the dock, applying pressure against your charger to keep it in place.
3. The "Door Clamp": Reinforces the "Door" piece.

---- Print specs / details ----

Printer: Sovol SV06 Plus Filament: I printed multiple docks successfully with PLA and PLA+. Temps: 195 deg nozzle temp, 60 deg bed temp Slicer: Cura

• Standard supports
• Gyroid infill, at 10% density.
• Initial layer speed .60 mm/s

Print it flat on its back -> Supports are minimal, and pretty easy to remove!

----------- credit -------------- I originally tried the below docking station I found on thingiverse, but it unfortunately did not fit the charging cable that came with my ModMic. Aesthetically it wasn't my style, so I designed one that would be easier for others to adjust. I took some inspiration from user eldragon0's thingiverse design: https://www.thingiverse.com/thing:4110047