AVAILABLE FOR COMMERCIAL RESALE WITH TIER 2 - V2 FRAME ONLY
This is a Hueforge Filament Painting of the God of the Sea Poseidon. This model uses 4 colors. This model has a lot of detail so it will take a few hours longer to print. This model will only be available to club members.
I have included two different 3MF files for Bambu Studio. One for people with 1 AMS and one for people with NO AMS (manual color changes). If you do not have Bambu Studio I recommend using it to look through the settings and copying them to make a Hueforge profile template for yourself in your slicer of choice so that future prints will be quick. A lot of the settings are recommended by the Hueforge team.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profiles have a height modifier to print the first 0.64mm @ 0.16 layer height as that is the min depth/non blended portion of the black. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers. This shaves off approximately half an hour of print time.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3.1 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4.4
Swap Instructions: Start with Charcoal At layer #13 (1.12mm) swap to Blue Gray At layer #18 (1.52mm) swap to Gray At layer #24 (2mm) swap to Ivory White for the rest.