This usbholder is the best way to store your sticks in your nuts. The feeling of such a large nut is quite nice


What would you like to see next?

CC BY-NC
Created By B._.render

Nut Usb Storage

This usbholder is the best way to store your sticks in your nuts. The feeling of such a large nut is quite nice

 Print v2 to have no B._. logo mark on the print. 

What would you like to see next?

CC BY-NC
Created By B._.render

This was a idea I had while thinking about what to make. I put a small maple tree into a maple tree shaped planter.

this was my first shot at sculpting and I am really happy with how it turned out. i

I printed mine with walls, 0% infill(this may cause issues TBD but use more walls to help the potter last longer). I always use a brim but you may not need to. I printed mine smaller by about half because I am cheap. print in place model

Do Not Overwater


CC BY-NC

Maple Stump Planter or Container

This was a idea I had while thinking about what to make. I put a small maple tree into a maple tree shaped planter.

this was my first shot at sculpting and I am really happy with how it turned out. i

I printed mine with walls, 0% infill(this may cause issues TBD but use more walls to help the potter last longer). I always use a brim but you may not need to. I printed mine smaller by about half because I am cheap.

Do Not Overwater

here is a stopper for tha hole that lets water into your jugs.

may need to be scaled to fit your exact hole. I have 2 holes and one hole is tighter than the otrher hole

Water Jug Hole blocker

This is my second try at this project. the first try got stuck on my hand...
 This one has a built in safety feature and I tried to make it stylish. 

Ring Blank With Gap Mk.1

I am trying to make a neat phone stand
 PROBAPLy doeas not work right off the press.
designed for my Iphone 7? idk which

The wall is 2.4mm thick (3 passes at .8mm width) I printed one at 1.6mm with and it had some major wigglies

The LITTler_tally.stl

I am trying to make a neat phone stand
 PROBAPLy doeas not work right off the press.
designed for my Iphone 7? idk which

LOL does not work yet. the phone just falls off
I wantto make a phone stand that will hold my phone at a better hieghtso my neck wasn't bent as much.

the wall ticness is 1.6mm

THIS mode has a 49% chance to work. I predict that the base is not wide enough for how tall it is. I have a plan to add a wooden base if that is the case. SO JUST BE AWARE it may be wiggly. I tried to make it thick enough to not wiggle but not use a sh@ ton of filiment

TallBoy_1.stl

I wantto make a phone stand that will hold my phone at a better hieghtso my neck wasn't bent as much.

THIS mode has a 49% chance to work. I predict that the base is not wide enough for how tall it is. I have a plan to add a wooden base if that is the case. SO JUST BE AWARE it may be wiggly. I tried to make it thick enough to not wiggle but not use a sh@ ton of filiment

This is a stand to hold a 9v battery and a breadboard powersupply. 

You can purchase a digital textured [5v Bread Board Power Supply](https://sketchfab.com/3d-models/5v-bread-board-power-supply-688f57bf597f43d0be6f15571eaf95cd) , I made it 2 months back... I guess I really like this power supply lol

I use these thangs all the time to make simple lights and play with stuff, but I needed a place for it to be and not just floating on my desk. I am currently working on a second version that protects the battery better and holds everything tighter.

9v_PowerSupply Holder Stand

I made this little thang to hold up a small shelf I was working on in the woodshop.

I recommend printing this flat on its large  side

Shelf mount OR Box Holder

I made this little thang to hold up a small shelf I was working on in the woodshop.


This was my first attept at a coat hanger. I wouldn't call this one a 100% fail because it "works" and pointed me in the direction I needed to go to get one printed.

This model may need to be scaled to fit your needs <3

2coat_hanger.stl

usb_teeter.stl

a PEICE TO HOLD MY WOOD TO THE VROOMVROOM SUCKER


VACUUM_ATTACHMENT.stl

I designed this cardholder to be compact to maximize the number of sd cards one could hold in a space.


CC BY-NC 4.0



My Other Platforms:
https://b-render.itch.io/   <-- Games, Assets and more
https://sketchfab.com/Brendan_489   <-- Game assets
https://www.thingiverse.com/b_render/designs   <--- The other place my 3d prints go

SD Card Holder 10 Slot Design

I thought it would be cool to make a mini cinderblock. The block is 1x1x2 inches

If you need it in different sizes you should be able to scale the block in your slicer of choice

CC BY-NC 4.0

https://b-render.itch.io/
https://www.thingiverse.com/b_render/designs

2 Inch CinderBlock

cinder_block1.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5051247.

I remixed this clamp into a usb holder

USB Holder Clamp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5028922.

I created this gear to hopefully make gear ratios easier to play with. Im currently printing it at slightly larger size to see if it will fit better with the original pieces. Either the piece is slightly small, my printer is slightly out of scale or it was because I printed on low quality/ had some filament over extrusion

Double Gear With 8 and 40 Teeth

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5030073.

This peice of art can be used to hold a single pack of papers In your pocket. now your papers will never look used because you'll have this fancy pocket protector protecting them. This isn't much of a "real issue" that I solve and more of something fun to model.


What do you think would make this cooler or more useful?

Paper Pocket Protector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5033887.

I made these charging stands for my dad for holding his ps4 controllers

Controller holder for Ps4 charging display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5024262.

This is a spool holder adapter for 250g rolls and the ender 3 pro.

The stock spool holder did not hold the 250g rolls I have so I created this little insert in blender and sliced it in creality slicer, was my first time doing that. I ran into an error where the mesh was not whole and the walls were not thick enough to slice, to fix that I used a thickness modifier in blender which gave me the result I was looking for.

I think the part should have more supports because the orientation I printed in made the "grain" in the same direction as the sheer force of the spool pulling down. 

250g Spool Holder Addon For Ender 3 pro

I made these to go on my desk.

CC BY-NC 4.0

Stackable Desk Bin Organizers

crate.stl

I am working on a switchblade and thought this handle was pretty neat so I uploaded it now before I mess it up. I have not printed this yet 

For more of my projects:
https://b-render.itch.io/
https://www.thingiverse.com/b_render/designs
https://www.instagram.com/b._.render/

Switchblade Handle

I am working on a switchblade and thought this handle was pretty neat so I uploaded it now before I mess it up. I have not printed this yet 

I measured my pointer finger nuckle to get a good fit with the ring. the ring has a 21mm diameter. I printed this with the skinny end on the bed.

Custom Bling Bling 21mm

I measured my pointer finger nuckle to get a good fit with the ring. the ring has a 21mm diameter

I remixed this from https://www.thingiverse.com/thing:4981711. I was going to add some customization to my ender3 so I made up these  using the connector from this zip tie mount. 



I was going to just make my name I figured this was usefull to more people.

for more of my projects:
https://b-render.itch.io/
https://www.thingiverse.com/b_render/designs
https://www.instagram.com/b._.render/

Alphabet Decoration Mount FOr 2020 Rail

I remixed this from https://www.thingiverse.com/thing:4981711. I was going to add some customization to my ender3 so I made up these  using the connector from this zip tie mount. 



I was going to just make my name I figured this was usefull to more people.

B.stl

I made this crayon holder to... hold crayons

For more of my projects:
https://b-render.itch.io/
https://www.thingiverse.com/b_render/designs
https://www.instagram.com/b._.render/

16 Crayon Holder

I made this crayon holder to... hold crayons

This is a wallet design I have been working on. I made the back part solid to keep it private and in the front I cut out a double diamond matrix to reduce filament cost. This is a work in progress and I need to add a "scoop" out of the bottom to push out the cards.

4 slot printable wallet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5051247.

I remixed this clamp into a usb holder

For more of my projects:
https://b-render.itch.io/
https://www.thingiverse.com/b_render/designs
https://www.instagram.com/b._.render/

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5046075.

I remixed these peices from https://www.thingiverse.com/thing:2552352

I have always liked knex especially making machines with it so I was really happy to find all of these high quality gear models by Knex Obsessed. What I did was pair all of the gears with a 1:2 ratio so they would print and act as one unit.

Gear Sets With Ratio 1:2

I created this low poly model for one very important reason... I wanted to see how it went from blender -> slicer -> printer. This was my very first print of my own model and Im generously giving this complex beast away :) lol have a good one

2cm export test print

Nerd, 3d modeler, 3d printing ADDict.

My Other Platforms:
https://b-render.itch.io/   <-- Games, Assets and more
https://sketchfab.com/Brendan_489   <-- Game assets
https://www.thingiverse.com/b_render/designs   <--- The other place my 3d prints go



Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships