Note: The files here are placeholders and may or may not work. For the latest files, please download from https://github.com/AxMod3DPrint/Drakon-Extruder
The Drakon Extruder
Reliability, Performance, Power
The Drakon has 3:1 gear reduction, fully FDM 3D Printed to keep costs down while performing as well as an extruder at 2-3 times the cost. The Gear ratio means that you’re able to use smaller, lighter motors while keeping the same pushing force as a standard non-geared extruder. For direct drive systems this means a lighter carriage, with less inertial mass, improving print quality. For Bowden systems running a standard sized motor means the Drakon becomes a power house of an extruder with all the power you’ll ever need to get your filament where it needs to go. In both Direct Drive and Bowden configurations you get the reliability and piece of mind to know that it’s not your extruder that’s going to fail.
Resolution
By increasing the gearing to 3:1, this triples the resolution, which can mitigate filament being extruded in pulses at slow speeds, which can result in a wavy surface finish, to give you a smooth surface finish. Note: This will not help other mechanical issues such as Z Wobble or Z Banding.
Materials
The Drakon has a fully supported filament path, which means it can print anything from flexibles, Carbonfills, metalfills and the hardest of filaments and beyond.
Universally easy to use
The Drakon strips down quickly with no need to remove the motor from it’s mounting, loosen the 3 bolts and just remove it from it’s mount. Remove the 8mm nut and bushing and that’s it, highly easy to maintain, should you need to take it apart for any reason. The Tensioner window allows you to easily see and set the tension quickly and precisely with no fuss. Easily mounted on a Direct Drive system as well as a Bowden.
<hr /> #####Assembly Video [https://www.youtube.com/watch?v=jO8r4zXFYHI](https://www.youtube.com/watch?v=jO8r4zXFYHI) Demohttps://www.youtube.com/watch?v=O43gTT2txT4
Initially it only works with 1.75mm filament, but the 3mm will be available soon.
<hr />This is licenced under the CERN OHL 1.2.
Copyright © AxMod 3D Print 2021.
This documentation describes Open Hardware and is licensed under the
CERN OHL v. 1.2
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions