Savannah Lightbox.stl

Model composed of :

• box : body + cover with a place for a battery box. 2 small inserts and 2 small screws are needed to fix the cover to the box.
• 6 boards constituting the drawing included 1 hueforge version and 1 simple version for the first board.

Height : 22.5 cm Width : 16 cm Depth : 7.7 cm

Print settings :

• Boards and cover print flat
• The box can be printed flat or upright depending on your printer, some supports will be needed to guarantee your print.
• no support needed
• 10-15% infill sufficient.
• for the hueforge board : - first layer : 0.16mm - other layers : 0.04mm (0.08mm is also possible) - PLA black until 0.56mm (layer 1 to 11) - PLA gray until 1.12mm (layer 12 to 25) - PLA Marble until 1.64mm (layer 26 to 38) - White for the rest.
• For all the other board : - layer height 0.2mm - I made a color change at the layer 6 (1.2mm)

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

Instagram

Facebook

Tiktok

Please do not hesitate to contact me if there is a problem with one of my models or if you have any questions

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)