Mr. and Mrs little turtle - holder for Toniebox
Today we have something special for our little ones. We modified an old design of ours and prepared it for the Tonie box. With this design, your Toniebox will get a whole new atmosphere at home. I'm pretty sure your kids will love this design :D At least I hope so.
We recommend painting this design with your children, but if you don't want to, you can use our easy painting system
Print the charging station from bottom to top as shown in the picture. The dimensions are precisely coordinated. This fits in perfectly
If this design does not fit on the printing plate, please do not scale as the dimensions have been perfectly matched. Otherwise the box will no longer fit you
For the sellers among you.
Please make sure you know how to sell this design without getting into legal trouble. We are not an official or unofficial partner of Toniebox. As far as we are informed, you are allowed to sell it if you do not mention Toniebox in your description or write that it is suitable for the Toniebox. But I'm not a lawyer :)
EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function.
Some slicers like Simplyfy3D have problems with the easy painting function because they do not support this function. If anyone has problems, just report them in Discord and we will put together a special file for you.
DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.
The invitation comes immediately with access to our exclusive design.
Print parameters. We recommend: first layer height 0.16mm (If someone wants something a little finer, then with 0.12)
layer height 0.16 mm (If someone wants something a little finer, then with 0.12)
Wall lines: 2
Fill density: 10%
Support: no support needed
We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users
If anyone has problems with the slicer, please use the file without the Easy Painting System. As we have discovered, some slicers cannot do anything with this particular setting. Luckily only a few are affected