I recommend downloading the Print Files (gcodes)

Printer requirements:

0.6mm nozzle with at least 200x200x200mm build volume

body.gcode , uphere_body.gcode:

Two versions of Yuki's body, "body.gcode" fits any 120mm pc fan, "uphere_body.gcode" is specific for "Uphere 120mm pc fan". Run a "5V Uphere USB 120mm fan" at up to 12V with a "usb fan speed controller" to get maximum airwflow at low noise. Prints with 170g of PLA in 11h. Ender 3 v2 gives the best outer surface smoothness. Get original Yuki color with "Xightongzhilian silk blue PLA"

cap.gcode:

Prints with 25g of Polipropylene in 1h45m. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP

icepack.gcode:

Prints with 100g of Polipropylene in 8h. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP

Website: https://www.riverfamily.art/

Video: https://www.youtube.com/watch?v=TAI5tish3BI

Slicing video: https://youtu.be/3wivfIi9iO4

Contact: alessio@riverfamily.art

LICENSE: Public Domain

https://creativecommons.org/share-your-work/public-domain/cc0/