Shoes sizes: EU
Use 0.6mm nozzle, minimum 250x250mm buildplate
Filaments:
- Recreus Filaflex 82A
- 3DFils TPU 85A -> decrease temp. to 220 °C
Depending on the size, each shoe takes 5 to 8 hours, weights 60 to 90 grams
I suggest using my print files (gcodes)
How to design and slice: https://www.youtube.com/watch?v=6ae-rzo_zJM
Settings (Cura):
place the model diagonally (45°), with the front and external part facing the user layer height: 0.36mm infill line width: 0.4mm wall line count: 0 top layers: 0 bottom layers: 0 initial bottom layers: 0 infill line distance: 3mm infill pattern: grid connect infill lines: yes infill line direction: [] randomize infill start: yes infill overlap: 0mm infill flow: 162% enable print cooling: no generate supports: no initial layer flow: 200% infill speed: 17mm/s initial layer speed: 10mm/s retraction distance: 7mm retraction speed: 65mm/s combing mode: off z hop: 1.2mm activate fan at the 40th layer counting from the end by writing M106 S84 in the .gcode (30% speed)
settings modifier (300x300x1.1mm solid, placed around Z = 1.7mm, this will make an internal flat top 3 layers platform to place the feet)
infill pattern: zigzag infill line distance: 1mm infill line directions: [30,60,90,120,150,180] Website: https://www.riverfamily.art/
Contact: alessio@riverfamily.art
LICENSE: Public Domain (https://creativecommons.org/share-your-work/public-domain/cc0/)
Also applies to gcodes, slicing process, pictures, videos and names