This is a Breacher style muzzle brake found in popular video games.

This has a 14mm CCW thread that allows fitting to airsoft replicas ONLY!!! Any attempts to fit this flash hider/brake replica to anything other than airsoft replicas will likely result in injury!!!

Whilst not required along with the main brake there are shim files to allow you to "time" or align to your barrel in the correct orientation, use 1 or several of these in combination to get the best fit. A rubber O-Ring would also suffice.

Please note that none of my files are 100% accurate in any way and are my interpretation of pre-existing designs.

I have more designs available over at https://cults3d.com/en/users/AirsoftProtoTech/3d-models

3D PRINTING SETTINGS
Material: PLA+ or Stronger however PLA is more than sufficient

Recommended to print vertically, supports shouldn't be needed

Print with Brim

4 Walls with at least 50% infill

I recommend using adaptive layer height if you can otherwise the finest that your printer can handle. The tips of this file are particularly fine so I would slow down the print as you reach the end

Tested on a Bambulabs P1P with no fitment issues however if threads seem tight I would recommend the use of a 14mm CCW tap to open them out.

Breacher Style Muzzle Brake

BREACHER STYLE MUZZLE BRAKE

This is a flash hider/muzzle brake of my own design combining elements from various popular flash hiders found in popular video games.

This has a 14mm CCW thread that allows fitting to airsoft replicas ONLY!!! Any attempts to fit this flash hider/muzzle brake replica to anything other than airsoft replicas will likely result in injury!!!

Along with the main flash hider/muzzle brake there are shim files to allow you to "time" or align to your barrel in the correct orientation, use 1 or several of these in combination to get the best fit. A rubber O-Ring would also suffice.

Please note that none of my files are 100% accurate in any way and are my interpretation of pre-existing designs.

3D PRINTING SETTINGS
Material: PLA+ or Stronger however PLA is more than sufficient

Recommended to print vertically without the need for supports.

4 Walls with at least 50% infill

I recommend using adaptive layer height if you can otherwise the finest that your printer can handle.

Tested on a Bambulabs P1P with no fitment issues however if threads seem tight I would recommend the use of a 14mm CCW tap to open them out.

Custom Flash Hider (Airsoft)

Barrel Shim .1mm.stl

Barrel Shim .2mm.stl

Barrel Shim .3mm.stl

Barrel Shim .4mm.stl

Barrel Shim .5mm.stl

This is the Tool used to fit the cap section of my Q Erector style stackable Suppressor with integral baffles (Airsoft ONLY).

The rest of the files can be found here:

https://www.etsy.com/uk/listing/1529251823/erector-q-style-stackable-suppressor?ref=listings_manager_grid

https://cults3d.com/en/3d-model/various/erector-q-style-stackable-suppressor-with-integral-baffles

Erector Q Style Airsoft Suppressor (Tool ONLY)

Hobbyist designer and maker of airsoft parts!!!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

AirsoftPrototech