These are Bo Staffs that collapse back into the handle, similar to my other collapsing swords. There are two sizes; small and large. You will need 150mm of Z for the small and 205mm of Z for the large. The small staff’s handle is 30cm long but extends to 140cm, and the large staff’s handle is 41cm long but extends to 180cm long. The small is more child size and the large is more adult size.
The handle consists of two parts that screw together with a threaded connector. I would print the connector with a few more perimeters to make it a little heavier. There is a file containing all five segments so you can print them all at one time, or individual files for vase mode printing. Personally I print in vase mode because you get higher quality and a stronger print. If you print in sequential mode you might be able to print all five segments at once. Set your line thickness to .85mm when printing in vase mode, and .43(two shells) when printing all the segments at once.
Filament Here are some affiliate links to the filament I used.
Small Staff Lipstick red Galaxy Black
Support and Licensing If you would like to help support more free models, or gain permission to sell physical copies of my models, consider joining my Patreon