By becoming a **Supporter** you will have access to all of my models uploaded. This comes with a commercial license to sell **physical 3D prints** from the models while you remain a supporter. 

Note: Selling privilege is only available while you are an active member. 





Supporter (Commercial License)

This idea was inspired by Flowalistik's Low-poly pokemon piggy bank which, you can see here: [low-poly-pikachu-piggy-bank](https://www.printables.com/model/234542-low-poly-pikachu-piggy-bank)

I wanted to make sure it was printable without supports for ease of printing. You will have to glue the pieces together. I may redesign it to assemble without glue in a future revision. This prints about 4" in diameter, but you should be ok scaling up if you want. 

Side note: this could also be used to make a Premier ball if you printed in white and red instead. 

Want access to all my models or want to sell physical items of my designs? Or are you just looking to support me? Head over to my [Patreon](www.patreon.com/3dgenedesigns)!

Pokeball/Premier ball Piggy Bank

Pokeball piggybank - bottom.STL

Pokeball piggybank - cap.STL

Pokeball piggybank - insert 1.STL

Pokeball piggybank - insert 2.STL

Pokeball piggybank - middle.STL

Pokeball piggybank - top.STL

**Power Ranger themed coasters AND holder**
I had a request for “Power Ranger stuff” at one of my shows so I came up with this. I drew all 7 colored symbols as the coaster and made a holder in the shape of the belt. The holder holds 4 coasters nicely. Each coaster isn't more than 5 colors so you shouldn't have issues with a MMU.

All of the coasters are in the zipped folder labeled coasters.

I designed the holder to print faster by making the top colored inserts printed separately. This top piece can also be your choice of color if you have a favorite ranger. 

If you'd like to help me out or have permission to sell physical items from my designs, please consider becoming a member!

For cork bottoms I use these: [https://a.co/d/c7CN0dR](https://a.co/d/c7CN0dR) 

Printing instructions:
0.3mm layer height with 0.4mm nozzle works well

Power Ranger themed coasters AND holder

Belt coaster holder - color inserts.STL

Belt coaster holder - grey.STL

Belt coaster holder - black.STL

**Marvel themed magnets/coasters (set 1)**

Batch #1 of the various Marvel magnets I've drawn. Each one is made to waste as little filament as possible which is why the solid backing. 

I reuse 3 of the magnets in a coaster set with some scaling. The Iron Man magnet had to have more added to it before it could be used as a coaster hence the extra files for that.

[Here is the coaster holder I designed for these.](https://than.gs/m/1054387)

If you'd like to help me out or have permission to sell physical items from my designs, please consider becoming a member!

For magnets, I use these with some glue: [https://www.amazon.com/dp/B0753ZPBLQ](https://www.amazon.com/dp/B0753ZPBLQ)

For cork bottoms I use these: [https://a.co/d/c7CN0dR](https://a.co/d/c7CN0dR)

**Special printing instructions:**
0.3mm layer height with 0.4mm nozzle works well

If using for coasters with the holder:
X scaling - 100mm
Y scaling - 100mm
Z scaling - 3.5mm 


Marvel themed magnets/coasters (set 1)

cap america blue.stl

cap america red.stl

cap america white.stl

Deadpool black.STL

Deadpool red.STL

Deadpool white.STL

iron man gold.STL

iron man red.STL

iron man white.STL

marvel red.stl

marvel white.stl

iron man coaster - red.STL

iron man coaster - white.STL

iron man coaster - gold.STL

Spiderman black.stl

Spiderman red.STL

Spiderman white.STL

My third installment of my Minecraft piggy bank designs. This one requires a little bit of gluing pieces together as I made it completely printable with one nozzle. (Provided you have the 4 colors of filament needed). This guy was fun to figure out how to also make it printable without supports. Making it for supportless printing is why it's divided into sections.

The bottom has a removable sliding door which locks in place so it won't come out on accident. I made the nose have a secret compartment to potentially store something small in. I wouldn't glue this in as removing the nose makes it easier to slide the main door out.

While I haven't tested it myself yet, you could make this in an artic fox color scheme replacing colors like orange to white and white to light blue. 

If you have any questions, please let me know! 

If you'd like to help me out or have permission to sell physical items from my designs, please consider becoming a member!

**Assembly instructions:**
- The orange ear pieces are designed to slide in place. Glue isn't needed for these, but you can if you want to.
- The rest of the decorative pieces all fit according to the pictures. 
- Keep in mind some edges are angled and so are the decorative pieces that fit in those holes.
- The tail has slot guides just to help with orientation upon gluing. 
- The body has a dove tail slot that helps with orientation upon gluing. I recommend gluing as much touching surfaces as you can.
- Nose piece isn't meant to be glued in place, but you can if you'd like.

**Print files:**
I included stl files that have all pieces needed for each color. 

3dgenedesigns

Achievements

Seedling

Fan Favorite