Is it back to school time already!?!?! Maybe you're in school or have kids, this will fit your basic storage needs! Every Part of this pencil has a purpose. There are 3 main storage parts to this pencil! The eraser, the pencil body, and the tip!  I love this thing and I will be making more variations of it! Please I hope you enjoy it and I would to see your makes!
 
Parts Required
Only PLA/Filament!
I used polyterra for the Eraser and Body! This is Polymakers brand! For the tip I used a matte black and beige from bambulab! The Silver is from Inland Filament!

Instructions! PLEASE READ OR RESULTS MAY BE BAD

UPADTED 8/24/24/
Layer Height has to be .2 or smaller. If you are running into issues with quality with the threads. ALSO DO NOT PRINT AT MAX SPEED OR YOU WILL GET BAD RESULTS. THE MODEL IS PRINTABLE!!! ADD BRIMS TO THE PENCIL BODY

To get best results-
layer height - .16
Walls - 3
wall generator type-classic
infill do 45% or higher will help with threads.
Brim on pencil body
supports manual on metal eraser band and the pencil tip. do not have it do supports on threads manually add them. 
Speed- do not go as fast as you can. I would recommend something slower along 150mm/s



There are .3mf files for the tip and the pencil body!
Everything was designed to print with no adjustments to positioning!

The Eraser is print ready and does not require any additional supports!
The Body will need inner and outer brims to secure it the bed plate! no supports required. I would consider slowing down your print speed for the body.

The Metal band prints better if you paint supports in the middle where there is a bridge.
I would use tree supports and pull it off the bed while the bed is hot! Additionally consider using a brim for better support

The Tip also requires supports. Only Paint the supports on the underside of the cone just past the threads! This will form a better connection to the body. However, I did get away without using supports on this!

Check Additional instructions to see what I used!

Happy Printing and Remember Please share your makes!!!

Pencil Pencil Holder (over a foot long!)

Metal Band.stl

Unleash the power of the Giga GyroHex Spinner! 
 --------------------------------------------------
-Easy to print!
-Prints in Place
-Relaxing 
-Fits on a 180mmx180mm build plate
--------------------------------------------------
Model Print Time and Filament Usage
Print time Averaging 5-8 Hrs
Filament Usage 250-400 Grams
--------------------------------------------------
Print Instructions:

It is already oriented in the way it should print.
If not make sure it prints with all 3 rings on the build plate. The base should be laying on its side.

Layer Height - .16 - .24 should work just fine. (I did .12 and it turned out terrible !!!)

Infill minimum 15% increase for a more weighted experience

Nozzle Size was designed for a .4 Nozzle

---------------------------------------------
Enjoy! Please share your makes with me I would love to see them! Tag me and I'll repost it on my story!






Giga GyroHex Spinner.stl

Messy desk or backpack? This can help! This is a fun storage solution to organize desk goods/supplies! Even Better this thing prints on a Bambulab A1 mini! Happy printing!

IMPORTANT MUST READ SETTINGS
-The settings for this print are non-negotiable. If you try and print it with your own settings, you will get a bad print. Follow my instructions to get results like mine. Your threads also won't print if you do it another way.

Layer Height- .16 cannot be .2 or higher.
Infill - 25% minimum 
Wall generator- classic
Walls-3
Manual supports required on the eraser band and pencil tip. You will need to paint them on the underside of the metal band and for the pencil tip paint them on the rim above the threads. I do organic tree slim.
For brims use outer brim if you are getting poor bed adhesion. 
Speed- I do mine slower since it is a tall print. I do around 150mm/s.


For coloring the pencil, I have not included a .3mf I am learning on how to export just colors. For painting use section height on the eraser band and pencil tip. Otherwise, the print will get an error. For the pencil body you can use gap fil on the lettering. 

IF you run into problems printing this, please let me know. I will help guide you through your issues.

ENJOY.

Mini Pencil Holder (Storage Container)

Eraser Band.stl

The ultimate way to get organized. I personally use this to hold my gaming controllers and headphones! However, it can be used for much more!!! This prints in one piece and does not need any supports! 

IMPORTANT!!!
If you are using it to hang controllers or headphones, I would Recommend using screws due to 3M Tape not being strong. Additionally, you have to place the controller in the second divot the one furthest from the wall. Controllers may fall out if there is an earthquake or lots shaking in the room. Just be mindful and while using it.

Instructions: 
Layer height .16 If you do anything above this you will run into problems.
Walls 2.
Wall generator classic. If you have it on anything else, you will not get good results.
Supports No
Brim No

Please share your makes! I would love to see them!



Snap Open Wall Hangar-Print in Place- No supports.stl

Want to block out the Sun but don't want to damage your walls/window frame?
This is where the window wedge comes in handy! I live in an apartment, and they do not want me to drill holes!!! This is why I made this! It was a quick inexpensive way to solve my issue! NOTE this will only work if there are blinds installed within the window! It uses friction to stick in-between the frame and the blinds.

This print is pretty straight forward. Just hit download and slice! I hope this helps all of you!!! 

Curtain Rod Wedge.stl

Discover the Swol Troll Flexi 3D model on thangs.com - a uniquely articulated 3D model by 3Digiprint. This detailed representation of a muscular troll is designed with exceptional flexibility and can stand on its own, making it an exciting and interesting addition to your 3D print collection. This muscular troll isn't just strong though, it's also though, it's also fashionable with a slick hairstyle. 

Instructions!
It is important that you follow these steps otherwise your print will turn out bad or fail.

layer height - .2 or .16
Wall generator - classic
Infill 5-15%
Walls- 2
Supports- yes paint the elbows and do tree slim.
Brim- no

Glue- optional.

If you have difficulty printing this, please reach out to me!

Swol Troll Flexi - Print in place - Articulated

Swol Troll.stl

It's hard finding a desk light as a minimalist. Constantly fighting to get back precious desk real estate.  That's why I designed the SkyLight. It reaches out to the stars with its impressive height of 250mm! Don't Worry if your printer can't handle this, keep reading.

------------------------------------IMPORTANT-------------------------------------
THIS MODEL WILL NOT FIT ON ANY BAMBULAB PRINTERS!!!!! However, you can print it on one if you only size down the Z AXIS! To do this you will have to scale but do not have uniform scaling on. Scale it down until it fits.
--------------------------------------------------------------------------------------
This design was intentionally made. This means I made it in cad with defined parameters. You will not need to print this in vase mode.  Let's get to the instructions!

INSTRUCTIONS
- Walls 1-3, 1 will give you the most light , 2 is what it is designed for 3, will make it a dark light.
- 0 infill is required. Do not use any infill
-Supports- Yes paint them on the bottom where the light will go this will make it more stable and reduce the chance of the model being knocked off.

Materials Required
Bambu Led Kit
PLA
Large Platform Printer


SkyLight Bambulab Led kit.stl

Want a new accent light for your desk? This is the way to go! It's designed to print easily! Assemble even easier and be a fun weekend project! What's great about this is the led light is from the bambulab kit! So, what are you waiting for???
-------------------
Parts Needed:
Bambulab Led Kit: https://us.store.bambulab.com/products/led-lamp-kit-001

Magnets: 5x3 magnets - amazon is where I get mine. If you have trouble with 5x3 magnets go for a size smaller. try 4x2.
-------------------
Printing Instructions:
Speed- Slow it down!!!! I printed this at 100mm/s
Infill: 5% If you want to have light pass through the bases if not go for over 45%
Walls-2
Wall type- I was able to use classic, but you may need to switch to Arachne. This may help with putting in magnets if they are not going in easily.
Layer height: .2 can go smaller if you want it to look better.
IMPORTANT: NEED A LAYER PAUSE FOR EVERY FILE!!!
You will need to add a layer pause. On Orca and Bambulab you can do this after you slice file and dragging the slider until you find the cuts for the magnets. Make sure to pause at the top of the cut so the magnet will lay flush with the layer it is paused at. For the Wall file it is needed twice.  

THIS DOES NOT NEED VASE MODE!

If you have further questions, please message me on Instagram and I will get back to you!




Modular Magnetic Light

Modular Magnetic Light Base.stl

Get access to unlimited downloads!!! Includes commercial licenses + access to my exclusive discord!

You have hurry though this plan locks after a certain number of members join!!!

UNLIMITED Limited Plan

Are you a Merchant??? Well, this plan is for you! Get access to commercial Licenses to sell my prints!  PLUS 20 Monthly Downloads!!!

3Digiprint

Select a membership plan

3Digiprint

Achievements

Seedling

Pinned models

Giga GyroHex Spinner.stl

Pencil Pencil Holder (over a foot long!)

Mini Pencil Holder (Storage Container)

Pencil Pencil Holder (over a foot long!)

Giga GyroHex Spinner.stl

Mini Pencil Holder (Storage Container)

Snap Open Wall Hangar-Print in Place- No supports.stl

Curtain Rod Wedge.stl

Swol Troll Flexi - Print in place - Articulated

SkyLight Bambulab Led kit.stl

Modular Magnetic Light