Hera Syndulla’s Flight Goggles - Star Wars

This is a digital 3D printable model of Hera Syndulla’s Flight Goggles from the Star Wars Universe. This model contains goggles from both Ahsoka and Rebels.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.

SIZE At 100% scale the model’s dimensions are approximately: Width 228 mm Length 184 mm Height 97 mm You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. We create our 3D models on our average-sized body template. (https://3d-mon.com/sizing-a-3d-printable-model-for-cosplay/)

3D PRINTING SETTINGS We use these settings for most of our prints: Layer height 0.15 mm Infill 15% Supports 45 degrees For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.

We try to make the models in a way that uses as little support material as possible. This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations 3Demon.