MagSafe SSD Holder for Apple iPhone to mount your SSD to the back of your phone conviently using MagSafe.

This model is spefically catered to the Samsung T7 (https://amzn.to/3KTUgoc)

This Model is printable without any supports.

My Reccomended settings are after some trails are: Walls: 3 Infill: 30%-50% First Layer: 0.3mm Layer Hieght: 0.2mm

The MagSafe magnet you will need is: https://www.aliexpress.com/item/1005006447845436.html?spm=a2g0o.order_list.order_list_main.11.67c41802gxiyZJ

After much product testing this was the best magnet that provides strength and grip.

Prints the best with PLA-CF, I found PLA strong enough but other materials can be stronger.

Print time is about 1 hour and 30 min with a filament usage of 40g, making this product a profitable one.

Bonus: If you want to include the cable you can find it at: https://www.aliexpress.com/item/1005005840688662.html?spm=a2g0o.order_list.order_list_main.69.67c41802gxiyZJ

All Free & Maker Plan Models are under CC BY-NC-ND License Commercial Plans are under CC BY-ND License