So long story short I made this clock a while ago but to upload it I needed to upload the files as a .rar file and some people have had issues opening it. I am hoping that this fixes it. Also as a warning, this clock is very hard to get running so just get prepared to spend some time troubleshooting 

First ever clock

f1 (1).stl

Stand.stl

So these are for the guy who wants to print my tourbillon at 200% scale. 

I believe the hairspring would work, but the main winding spring would end up too thick.

These parts have extra coils and have been made thinner so that when scaled up the wall thicknesses would still be ok. IN THEORY!

I made two versions one with a 1.5mm thick spring when scaled, and one with a 2mm thick wall when scaled, just in case the 1.5 is too weak at the larger size.

I have never printed these parts but I hope they work.

Parts for my guy Besmer

1.5mm at 200%.stl

This is my 100% 3d printed tourbillon model it has no metal parts and uses only PLA. It can run off the stock spring for about 1:20, and it even self starting is assembled correctly.

Instead of given dimensions and stuff so you can use it in your own stuff here's the source files available for free off Gum Road (Fusion 360): https://app.gumroad.com/25cogs#OsKSd

All of these parts are printed in normal PLA
you will want to make sure that you have your E-step and flow rate set correctly as the tolerances are very tight, I highly recommend you freshly level your print bed. As far as settings go you will want to print these parts with movement speed turned down to prevent blobbing on corners, and leave support material on but very few parts will need it as all parts can be made to sit flat on the build plate.

You will want to print the following parts at .1 layer height, 6 wall lines, no infill needed.

Arm
Balance Wheel
Block
Case1
case2
Clip
Clip2
Clip3
Lower lock
Pin
Spring
Winding Spring
Wheel

These other parts can be printed at whatever setting you to want but I would still recommend them at .1

Bottom cover 
Gear frame
Ratchet case
Top Cover
Winding Carry 
Winding Nob

Also, I made a video covering a lot of the stuff in more detail
The shorter assembly process: https://youtu.be/zQoGr4DHVNs

The Troubleshooting of the printing process: https://youtu.be/rid8xmIUg5w

I cover every issue I can think of you many have when assembling: https://youtu.be/aKGySgZwoog

The complete assembly and troubleshooting prosses: https://youtu.be/_W5_7JjLDVw

How to model parts to uses this escapement in your own designs: https://youtu.be/nVgzppsa4Co


100% 3d printed Tourbillon 

don't print this it is just one big block I don't know how to do the assembly thing. So this is the only way to show it assembled.

Small Boy v4 V2 was right all along v21.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

2.5cogs

Achievements

Seedling

Debutant

First ever clock

Stand.stl

Parts for my guy Besmer

100% 3d printed Tourbillon