this is my first real design to make a “small” package of 2 devices, 1 is the xreal beam and the other is a USB C power and data splitter I attached an existing design from Jsaux mod case as an eas

Print this at as high a quality as you can. The device is worth it. I just used the highest-quality preset in Cura with tree supports. This should just slide onto your beam with the exhaust facing up

This remix takes the original and turns it on its side for better strength printing in the horizontal orientation so the layer adhesion is not point of weakness for the clip. It also adds a hook su

design that makes a "small" package for the real beam and a power and data splitter adapter.

Nubia Redmagic dock plus beam enclouse

I wanted to make a protective case, and eventually belt-clip to hold the XReal Beam to my waist.

This is a case for the Xreal Beam. The device fits exactly into the case. There are slots in both ends to connect cables to the Beam or to switch it on without opening the case.

HCSW holder for xreal beam

A case for the LilyGo T-Beam Lora Circuit including buttons. You need only 2 screws 2mm x 3mm.

A somewhat rugged plastic shell for a LILYGO TTGO T-Beam Supreme module.

Lid Beams are placed under Standard Bin Lids and are useful if your Multibins are divided with Short Bin Dividers to prevent small items from moving to different compartments of the Multibin. Use Out

Customized version of http://www.thingiverse.com/thing:2503065 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2503065

Custom case for the T-BeamSUPREME V3.0 ESP32-S3 with ublox M10. Only requires 2 M3 nuts and 2 M3x8 bolts. Use CoverMount.stl if you want to add a thread adapter for 1/4-20 mounting. Print Settings M

Lid Beams are placed under Standard Bin Lids and are useful if your Multibins are divided with Short Bin Dividers to prevent small items from moving to different compartments of the Multibin. Use Out

This is a case for the T-Beam Supreme, designed with the Meshtastic project in mind (https://meshtastic.org).

Watch the video for more information on construction and design. The body is screwed on with 4 m3x30 screws. On the contacts of the TTGO board, using a standard connector and a piece of a breadb

Customized version of http://www.thingiverse.com/thing:629875 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=629875

Tesla model 3 high beam dipper shifter lever

A stylish Sci-Fi inspired case for your Meshtastic radio

Customized version of http://www.thingiverse.com/thing:630626 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=630626

Customized version of https://www.thingiverse.com/thing:1119651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1119651

A lego beam

This part was designed for Lego Technic.

Customized version of http://www.thingiverse.com/thing:630626 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=630626

Hi made this xreal air pro 2 case no supports needed 10% infill gyroid 0.4mm nozzle this uses neodymium magnet 5MM X 2.7MM

Rugged case for your TTGO T-beam with SMA antenna plug.

Customized version of http://www.thingiverse.com/thing:204240 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=204240

This is a clip-on frame for the Xreal Air on which you can attach a specific type of sun glass covers found on Aliexpress. These are the ones I used: https://aliexpress.com/item/1005004502185260.ht

A special modification for the WPL B16 beam to allow for additional assembly, for use in other 1/16 scale RC vehicles.

<h1>Brio Compatible Builder Series:</h1> <h1>Beams</h1><br> The marketing team is very clever. Our boys received a BRIO Builder ( 34591 ) Builder Motor Set as a shared Christmas gift. In this kit, y

This is a remix of INVASION! The electric tea light UFO. Will need to go to that listing for all files.

Lid Beams are placed under Standard Bin Lids and are useful if your Multibins are divided with Short Bin Dividers to prevent small items from moving to different compartments of the Multibin. Use Out

A mount to attach a 15mm x35mm din rail to a 2020 beam.

Provides a screw mount for SO-239 panel mount connector and routing holes for Dipole wiring. Heavy influence from https://www.thingiverse.com/thing:894073.

This is yet another case for the TTGO T-Beam LoRa board with GPS. This one fits my board which is labeled T22 V1.1 20191212. I added an additional angled face on the bottom of the case so that th

Lid Beams are placed under Standard Bin Lids and are useful if your Multibins are divided with Short Bin Dividers to prevent small items from moving to different compartments of the Multibin. Use Out

Work in progress - Changelog: 2019-06-20: Recent tests: Use a slightly thicker wire (1 mm²) for better bandwidth and easier tuning 2019-05-05: Slightly shortend the caps to reduce printing time. 20

Great design but for 1515 profile I had 2020 profile so amended and resized to use 2020. Now up and running will be posting any improvements I make as I tune and adjust performance. I have made

This is a case for TTGO T-Beam v1.x NEO-M8N/6M boards, designed for the Meshtastic® project (https://meshtastic.org).

[B071HSN4ZJ] from the Amazon Berkeley Objects Dataset by Amazon.com. Vintage and industrial come together in this handsome chandelier. Multiple oil-rubbed bronze metal rods are shaped to form a sphere

Lego Technic Beams with more than 15 holes for big builds!

[B073P5QJ53] from the Amazon Berkeley Objects Dataset by Amazon.com. The orange sunset sky is the backdrop for tall evergreens standing by a river. This magnificent photo is actually printed on nine s

This is a modified version of a barcode scanner originally uploaded by LOUIS TIMPERIO. I updated this version to include a simple stand that you can edit the angle of. Also threw in a basic infrared b

I love Godzilla and collect figures so I wanted a way to use my 3d printer for the figures because to get things for these figures can be expensive so here is a beam attack that should fit with most G

Sonos Beam Stand to have space below for e.g. ATV

Modeled after: http://1.bp.blogspot.com/-AEkjUtzTdZw/Tk4mfM48HZI/AAAAAAAABDA/6d6hkiGNkYg/s1600/Gundam+Beam+Saber.jpg

Modular Truss System This started as an experiment to see if I could make a beam to support a CPAP hose, and ended up being a modular truss system that could be used in a wide variety of use cases.

1x6 v2 and 1x8 v2 VEX beams.

this reduces the pressure on your nose. I need to use a lighter to make some adjustment to maximize comfort tho

[B078JM6FRK] from the Amazon Berkeley Objects Dataset by Amazon.com. Bring a rustic vibe to your home with this galvanized metal planter resembling a vintage milk jug. Round wooden handles add a charm