Leaf Blower Velocity stack that fixes the annoying shirt getting sucked in.

velocity stack 39mm will fit most 125cc carbs may need fine tuning to make it fit.

Just as title states, concocted in 3d builder for windows. pieces should be in parts if wanting to modify or add your own wheel design in or adjust size. Not quite tested but the bbs style model can b

Velocity stack for makita dub185 and dub186 blower.

This is a rack of velocity stacks for a small block chevy V8 engine. Stacks are angled to provide maximum intake. Also includes a small blast box.

This velocity stack has only a single, minimally designed fin to support the center cone. It doesn't seek to direct the air, but rather to allow the swirl of turbulent air as much as possible on the w

90 mm long velocity stacks for Weber 40 DCOE, verified in flow simulation

2.8''/72mm Velocity stack with 10 degree angle made it to fit a td04 intake with golf ball texture

Made some shorter combined velocity stacks more like the ones that came with the 40mm Webbers I had on my VW.

Velocity Stack for Honda Shadow VLX600 Single Carb. Designed to be clamped on with a 2.25"L x 0.5"W hose clamp.

KTM 50 Velocity stack for 33mm (outer diameter) carburetors intakes. Also included the screen, glue some panty hose as a screen behind the 3fd printed part.

I wasn't super crazy about any of the fan covers I could find, especially considering my fans have a 21mm center section, so I designed this one with silence in mind. I designed this myself from scrat

Maybe the first and only Velocity Stack compatible with Hero Me Duct 5020 Blowers

These are velocity stacks I designed to fit INSIDE pod filters. They provide the size and aesthetic of the pods, but dramatically improve the performance of CV type carburetors. CV carbs operate b

these are velocity stacks designed for Toyota Blacktop 20v throttle bodies. may require minor trimming due alignment consistency on factory item, The taper in the stacks matches the taper on the Toyot

These velocity stacks are the same height as the rear (taller) stock velocity stacks. After seeing other 3D printed velocity stacks I found the following document on designing of stacks: https:/

Do your overhang droop but your cooling fan is already set to 100%? Wanna improve your airflow without buying a new fan?

Just for fun i made a Velocity stack for the universal Weber DGAS 38/38. Long Model is from base to top aprox. 77mm Short Model is from base to top aprox. 53mm Please donate if you want to suppor

I wanted to make a velocity stack rather than buy one. I've seen plenty of things online but I just didn't want to purchase one. Here is my latest result.It worked out great! I will update revis

Velocity Stack for the Honda Grom / MSX 125cc Intake. More noise and better throttle response.

Vortex Velocity stack for GEN 2 Aprilia RSV 1000 R. Will need to drill small holes in the bottom mount, otherwise it is a direct replacement for factory. Noticeable mid-range response improvement.

Hierbei handelt es sich um Luftfilter Düsen, die ich mir selbst konstruiert und gedruckt habe. Bei mir finden sie Einsatz im originalen Luftfilterkasten einer Kreidler RS mit 80ccm. Die Düse kann

this is a velocity stack i have been working on that will fit a tilitson hr carburetor or most 60s-70s skidoo single and small twin, as well as minibikes and go carts with the same carbs. will po

This is a velocity stack for the Honda MSX125/GROM. It replaces the stock, restricting, snorkel in the airbox which gets removed when you do the well known 'airbox mod'. It has an elliptical inner sha

84mm inner diameter.

Add a velocity stack to your Makita BUB182 air blower. Velocity stacks are used to improve efficiency of air inlets.

During the process of restoring a 60s Holley 2283 carbeurator I found it to be irrepairable so I decided to make it into a lamp. I designed this velocity stack to use as a lampshade, but it may be fun

Fan velocity stack

velocity stack for 50mm carburators

This is a combination of two other models, that I liked

Velocity Stack for Zenoah 23cc benzin engine.

I HAD A DIFFERENT ONE ON HERE, BUT I DECIDED I DIDNT LIKE IT AND I COULD DO BETTER.

I upgraded the fans on my Monoprice select mini from the cheap 30mm units to 40mm Noctua. I found a particularly nice design for a velocity stack for 40mm fans that I was going to print out, but disco

Edit: I have uploaded a 60mm version too, but this is not tested. Hole distances are 50mm I wanted an cool fan duct for my hero me gen3 setup to prevent debris and small fingers (aka kids) hitting

Experimental velocity stacks for fitting a ID-style throttle body from e.g. Efi hardware, used with rotary (13b) engines I added a few different profiles if you want to try different lengths and ra

This is a velocity stack add-on for the supercharger remix for erics LS3 v8 engine

I made a velocity stack for a 40mm fan. It may or may not silence the fan, and it may or may not increase fan performance, but it certainly looks like air is going in there like a maniac. I made

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lymNo6TdbFH

This is a Box/Crate for my Nissan 350z - Velocity Stack Mod to Sit in to apply final preperation/sanding before fitting. The Velocity Stack should sit nicely inside without little to no movement.

Velocity stack/ intake trumpet for gas DLE engines with walbro carburators, from size 20cc-60cc. Print in anything but NOT ABS. ABS is dissolved by gasoline. Printed mine in PETG. Might need sup

Made with Alibre Design 2011 A velocity stack made for a top secret project I'm working on.

Anet A8 Blower Fan Duct (velocity stack) <br/> Summary An intake duct for the blower fan on the Anet A8. Doesn't really serve a purpose other than to make your printer look cool. It ali

A Velocity Stack to fit the Toyota Black Top 45mm ITB's I made it to teest if printed ABS is usable. If not it will look cool on the desk.. :)

This was used to apply on a Datsun L16 with fuel injection. Final Version

2 stacks, one with a carb diaphragm vent, the other without. print with the opening of the velocity stack facing up. They need support. The hole in the vent stack can be cleaned with a 1/4" drill bit.

This is a Velocity Stack Trumpet Air Intake Mod for Pre-06(Non-RevUp) Nissan 350z. (Top Cylinder Width: 101.6mm) x (Bottom Cylinder Width: 76.2mm) x (Height: 25.4mm) x (Thickness: 4mm)

Toyota 4AG engine velocity stack with 83mm bolt spacing.

Velocity Stack for Weber DCOE 45 and possibly 40. Have not confirmed fitment to DCOE40 yet. Prints without support at up to 0.3mm layer height. I used PTEG, have them on my car for a year now with no

I needed a 60mm grill/guard and also wanted to use a duct/velocity booster so I combined two designs I liked into one

This is a velocity stack engine inlet to increase engine power. Its in effect a 2.13 ratio elliptical bell mouth for use with a 6" or 150mm automotive cone filter. Tried and tested on my Honda B18C e