Fixed: Hole for screws added

For mounting a Ubiquiti UniFi AP AC Pro over a wall network socket with the original Ubiquiti AP Wall bracket.

This wall mount is designed for a variable wall slope (0 - 90 degrees). It fits the Ubiquiti U6-Pro and U6-Lite mounts.

Ubiquiti UniFi AP In-Wall (UAP-IW) on wall mount box.

This is an adaptor to allow you to mount a UniFi piece of equipment to a standard ethernet wall socket. It reuses the existing wall fixings and the fixings that come in the UniFi kit (tested on AP-AC-

English: For mounting UniFi AP-AC-PRO on the wall when ceiling mount is not ideal. This is a remix of Pelphry17's "UniFi UAP-AC-PRO Horizontal Wall Mount". https://www.thingiverse.com/thing:431

Wall Mount for the larger Ubiquity Unifi U6 Enterprise AP mounting plate

Wall mount for all Ubiquiti UniFi AP, Lite, Pro and Long range.

This is a standing mount to allow you to use the Unifi AP In-wall U6 (U6-IW-US) without wall mounting it.

This is a wall mount bracket for UniFi FlexHD mesh AP. It's designed for damage-free mounting using medium size 3M Command refill strips.

Remixed to work with the UniFi AP-AC-LR mounting bracket

A friend is building a new house and had electric junction boxes mounted where he plans to install Unifi APs on the walls. Those APs require a mount adapter that connects the AP backplate to a standar

With this model you can mount the AP directly on your European wall socket inside a JUNG LS 990 frame.

This allows mounting a Ubiquiti UniFi AP-AC-Lite2 wall mount plate on a standard North American single gang electrical…

For mounting a Ubiquiti UniFi AP AC Pro over a wall network socket with the original Ubiquiti AP Wall bracket. needed: 1x Ubiquiti UniFi AP AC Pro Wall bracket 3x M3x16mm screws with countersunk

Created this wall mount for the Unifi Enterprise 6 AP model as the others did not fit the newer metal AP mount plate. This is designed to mount horizontally when the AP unit is attached to a wall. The

This allows mounting a Ubiquiti UniFi AP-AC-Lite2 wall mount plate on a standard North American single gang electrical box. The lower screw hole on the UniFi mount is attached to the mount with a #6

Wall bracket for Unifi AC-AP Pro can be swiveled 90 degrees. it becomes additional 1x M6x45 screw with nut required.

This is a standing mount to allow you to use the Unifi AP In-wall U6 (U6-IW-US) without wall mounting it. I have one at each end of my house facing inwards and hide on shelves like most consumer APs.

This allows mounting a Ubiquiti UniFi AP-AC-Lite2 wall mount plate on a standard North American single gang electrical…

Wall mount for the new Unifi Cloud Gateway Ultra.

made some mounts for the Unifi AP

Made this under table mount for my 8 ports unifi POE switch.. so it does not take up space on my work table Sketchup files is included

A wall mount for unifi's flex mini POE driven switch. The mount is simple to print, needs no support and prints fast. I printed in PLA and the fit is great can even mount it upside down if wanted,

Ceiling mount compatible with most of the Ubiquiti access points.

Wall-mount spacer for mounting the Unifi U6-IW on the wall. Update - thickness is reduced from 34mm to 21mm as a result of using angled rj45 cables. New variants with connecting cable on the left a

Under eve mount for G5 Turret Ultra that uses the hardware that comes with the camera

This is a simplified version of the unifi usw flex wallmount. It is simplfified for easier printing. Print on the flat side! (mounting holes touching the print plate) No supports required!

EN:   Hello everyone, thanks to the extrinsic motivation of https://apfelcast.com/ I have created this wall mount for the new Unifi Express. I recommend the Youtube channel Apfelcast to all IT an

This part is based on the original bracket. I had 2, but one without bracket. This way I have measured the original bracket to print a second one. Came out perfect. Enjoy!

A bracket to mount a Unifi Access Point U6 Lite on to the top of a wire "baker's rack" storage unit.

Wall Mount for UXG-Max (Gateway Max) and UCG-Ulta (Cloud Gateway Ultra).

Unifi G3 flex camera wall mount fix to wall with insulation

I could not mount my Accesspoint to the ceiling so I thought why not mounting it to my Ikea Kallax shelf. So I designed a mount which does not require any additional hole or drilling. It just uses

Easy to print wall mount for the new Unifi Cloud Gateway Ultra. Print orientation is laid flat. 3 wall loops 20 infill (I prefer gyroid) 0.20mm layer height Supports required on the overhang I have ad

A wall mount bracket for the UniFi Flex Mini 5 port switch. Print it with the ethernet port side facing the build plate and then no supports are necessary. I printed with 2x outer walls, 2x top

Wall Mount for a Ubiquity Unifi Flex Mini switch. This one is designed with a little thicker walls compared to the other ones found here on Thingiverse. The distance between the two mounting ho

Mount for Ubiquiti Unifi 6 when using old ceiling speaker cavity. STEP-file Included for customization.

Sturdy wall mount for the UniFi Express (UX). you can simply slide it in the mount.

Small wall mount for Unifi Flex mini. Printet on an Anycubic Viper in draft mode with regular settings. Using Cura for slicing.

UniFi Express mount for Leviton Structured Media Cabinet using the vertical holes (5" OC).

Base with Multiboard snap

A multiboard mount for the Ubiquity Access Point U7 Pro (u7-pro) Fits into multiboard: https://www.multiboard.io

Made a remix to provide space for an airflow at the side the gateway is mounted. The model is 2mm wider and it now has 2 gliding plates to create the airgap

A wall arm mount for the Unifi U6 Pro and Enterprise series

Wall mount a "UFO" U6 Lite WAP in proper horizontal orientation.

Fix the router on the wall so it don't tip over because of the cables. print at 0.1 millimeter and evt. use support. PLA is used

Useful addition to use on desk.

Ceiling mount compatible with most of Ubiquiti access points. In addition to the printed parts you also need: 1x M6 screw (to attach the mount to the ceiling) 3-4x M3 screws with nuts (to att

I created this wall mount for the Unifi G3 Flex camera. The mount is designed for mounting to sheet metal siding. I used adhesive foam tape to mount it, but there is also #10 size mounting holes for s