A cardboard spool adapter for Elegoo's PLA to the Bambu Lab AMS. This is a model I whipped up in Fusion360, I tried a few different options for the Elegoo spools but didn't like them. I designed this

This protective cover, designed by Kingroon, is for 3D printing users to prevent cardboard spools from deforming in the AMS. It's best to 3D print it using [PETG filament](https://kingroon.com/collect

The ULTMATE Sunlu-to-Bambu Spool Adapter I've taken the best ideas from the available Sunlu-to-Bambu spool adapters out there and combined them into one highly functional model. With this adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3458819. REAL filament (a dutch brand) often comes on a cardboard spool. That's fine, but most filament spool holders may

This is a spool adapter for Inland Brand Filaments that have a cardboard spool rather than the plastic spool. Why? This version was designed specifically to allow Inland Filament Spools to fit inside

This model is designed to make storing and using your filament rolls easier if you print from the Bambu Labs AMS. It ought to work for any printer where you print from a dry box with rollers, however

This is my first attempt to create a minimum viable adapter from Prusament spools to refill coils using Reprap's MasterSpool standard. The goal was to use as little filament as possible and to make it

A large hollow threaded bolt to enable the reuse of carboard spools with spool refills. Simply pull the two sides away from the center of your empty cardboard spool, you should be left with the sides

Follow us on Instagram (sektor7_studios_3d) Hello everyone, we have created a adapter for the AMS Lite system from BambuLab. The adapter allows yo

Inland (MicroCenter) PLA+ spool adapter for Bambu Reusable Spool. The fit is probably slightly too tight. I had to press the roll on pretty hard to get the carboard roll to fully seat; however, it did

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4760817. Because my printer can print a max of 18cm in z direction and the spools I buy are bigger as normal spools I had

Had a spool of Polymaker filament fall apart so rather that have it go to waste I made a insert spool spacer to hold the spool together. I am new to CAD and used Tinker CAD. let me know what you think

I like big spools and I cannot lie. I needed a 3D model of a Polymaker 3kg Cardboard Spool to make a spool holder for it, after not finding one, I made it. This is that model. This is not inten

Here is Filament Spool adapter, This adapter is designed to help make smaller 600 or 500 Gram spools fit and work in Ams or similar filament loaders, This design I made for my Anycubic ace pro to allo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4379466. A lot of my filament reels have an internal diameter of 61mm, which is a little too large to use with the bearin

This 4" Welding Spool Adapter works in conjunction with TimWelds 8" Welding Spool Adapter. It was made in collaboration with [Dave fro

A simple spool adapter for the AMS Lite. This adapter will allow you to use a variety of spools with larger central diameters with your AMS Lite.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5865577. These new Eryone Cardboard spools do work rimless but after many prints I noticed the cardboard started separati

This is a replacement for cardboard filament spools that I made to work with my Bambu Labs AMS unit. The AMS doesn't work well with the cardboard spools a lot of filament comes on; the drive rollers

Spool adapter : use sunlu and other 73mm spool with the factory spool holder from Flashforge.

If you use filament that comes on cardboard spools, you need this! It fits over your spool holder and inside the paper spool to make feeding during printing very smooth. No more flat spots on the spoo

Low Friction Spool Holder Adapter Are you like me and upgraded your bowden tube, but held on to the old one? Well you are in luck! Use it as part of this adapter to reduce friction between your spo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4887482. Filament spool adapter Inner diameter 3cm Outer diameter 6cm

If you need an adapter to insert larger spools in your FlashForge 3 this is the solution for you. It is easy to print, fits right in and is very stable! I recommend to print with the exact same scale

Use this to adapt your Sunlu 1Kg filament spools to the Bambu Labs A1 AMS system.

Simple support, (build plate only), besides that its basically plug and play. No screws, No springs, No bearings. Designed for Ender 3 Pro, K.E etc spool holder. You will need 1x200mm zip tie. Inse

A custom sleeve allowing you to use your Rosa 3D refills with BambuLab reusable spools! _Note: BambuLab spools are slightly wider than the refill - the assembled spool may need some handling in order

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1697121. Simple spool holder designed to go on the stock arm to allow you to run smaller .25kg and .5kg spools that do no

the internal spool diameter on this filament is 74mm which means you can't use it on almost any free standing holder, this is literally just a tube that fits inside the spool that makes it 66mm - that

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2852436. Filamentrollenadapter mit 50mm Innendurchmesser und 60mm Länge (-750g Rillen i.d.R) / Spool Adatper with 50mm di

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5445040. This was a request from my wife to make the print roll stay in place.

A spool holder Adapter for the Bambu Lab A1 Mini Allows you to securly hold spools with a bigger inner diameter. The outer part has a star grip screw so you can easily open the adapter if you need to

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3044456. Modeled after: Anet A8 Spool Holder / Adapter (51/52 mm diameter) (thing:1888486) In fusion 360. I filleted the

Adapter for the QIDI PLUS4 filament mount and the Creality Digital Spool Holder

Filament Spool Drawer. works alone or in combination with the included partitions. Designed to fit ELEGOO Spools of 1kg size. Each drawer accounts for a third of the spool, a spool can fit three of t

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3603712. Need to transfer filament from one reel to another for a friend? Want to split your filament onto another reel

#ThangsBambuContest had a brilliant idea while trying to save a print when the large spools ran out and needed to use a mini spool that my AMS obviously couldn't use. I designed it to drop in the

Designed for you to put the spool holder that came with the MK3S on your IKEA LACK enclosure for more flexibility! Buy me a coffee :) - [Printables](https://w

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1938332. Customized version of http://www.thingiverse.com/thing:735213 Created with Customizer! http://www.thingiverse.c

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1938331. Customized version of http://www.thingiverse.com/thing:735213 Created with Customizer! http://www.thingiverse.c

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4983456. Replacement screw insert to support M8 threaded rod-based universal spool holders. It is essentially just a cut

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1481725. Use a small diameter rod bent 90 degrees at one end (35mm) as spool holder. Install bracket first then insert r

All Credit to Tek_3D for creating this excellent Spool Holder (The Purple Parts) for the Creality Printers (Ender 3 and What Not). https://www.thingiverse.com/thing:4881187 I have the AMS for my

PROJECT BENCHY Creative reuse of filament spools, boxes, and printable parts Modular design built with stackable layers and custom connectors Inspired by the iconic 3DBenchy and presented as

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2598023. This is a remix of the Filament Spool HDD Bearing Adapter created by Peaberry (https://www.thingiverse.com/thing

Super Quick and Dirty spool adapter I designed for winding filament onto Bambu lab spools. I purposely made it slightly undersized so iI could add a layer of tape for extra grip on the spool. i hav

Candle Holder Series by Arcforms Introducing our newest series of candle holder designs, crafted in collaboration with Vector Beam, specialists in laser-cutting files. Together, we've created a uniqu

DIY Doubled Up! Remixed version of "RepRack" filament storage system that stacks 2 rows of Filament s

Big Spools Be Rolling Want to run 3kg spools with the official Prusa Enclosure? This design holds 3kg (and smaller) filament spools on top of the Prusa Enclosure with rollers riding on smooth rol

Aether: Nature’s Light, Captured Aether a series of 3D-printed pendants inspired by the intricate elegance of leaves. Each design is crafted to allow light to pass gently through delicate patterns, cr