DIY Doubled Up!
Remixed version of "RepRack" filament storage system that stacks 2 rows of Filament spools atop of each other. Designed to sit on a shelf or shelving unit. Uses 1/2" EMT conduit as the "Rack rails" of the system. Requires screws to install the clamps that retain the rack rails.
Requires additional hardware:
- Thread Cutting Screws
- M4 Hardware
- M3 Hardware
- M3 Heat Press Inserts
- 1/2" EMT Conduit
Brackets are sizable and won't fit on an Ender 3 (or similar 235mm) bed. Measures 248mm x 208mm. Sized specifically to fit within a Prusa Mk3 / Mk4 build volume (also fits the Bambu X1 & P1P bed).
Parts Needed (Affiliate Links):
- 1/2" Conduit: https://www.lowes.com/pd/Common-1-2-in-Actual-50-In-Metallic-Emt-10-ft-Conduit/3129551
- M3 Heat Inserts: https://amzn.to/3LEMezN
- Polymaker Filament: https://tinyurl.com/Polymakerr
Files Included:
- Double RepRack STEP File
- Left Double Rack STL
- Right Double Rack STL
- Mid Double Rack STL
- M4 Clamp STL
- Thread Cutting Screw Clamp STL
- M3 Insert Clamp STL
- Double Rack DXF
Recommended Print Settings:
- 3+ Perimeters
- 20% Infill
- No Supports Required
- PLA filament is generally fine for this application. If near hot components ASA or ABS would be preferred.
- Bigger nozzle sizes & layer heights recommended (.6/.8) but not required.
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/links
NOTE: Larger diameter spools may not fit. Only ones I know for certain are Printed Solid, their cardboard spools don't fit on the lower rack, but do on the upper. Polymaker & even ProtoPasta spools do fit fine.