DropEffect NeXt-G UHF Voron StealthBurner Mount
Let there be flow!
The Drop Effect NeXt-G is a compact, high-flow hotend for your 3D printer. Its official StealthBurner housing significantly reduces Z-axis build volume—but not anymore! This mount matches the length of a standard Stealthburner hotend assembly (actually 0.2mm shorter to improve part cooling airflow) while fully supporting the NeXt-G with the UHF extension.
To use this mount, clock the NeXt-G with the heater/thermistor wires facing forward and the kinematic mount screws aligned with the heater element. Alternative orientations are not supported.
Note: The stock M2.5x5mm screws included with the NeXt-G may not provide enough thread engagement. I recommend replacing them with M2.5x8mm countersunk screws for better mounting strength and compatibility with the printed part.Parts Needed (Affiliate Links):
Files Included:
- NeXt-G StealthBurner STEP file
- NeXt-G SB Front STL File (no ADXL bosses)
- NeXt-G SB Front STL File (w/ ADXL bosses)
- NeXt-G SB Rear STL File
Recommended Print Settings:
- .2 Layer Height
- 4 Perimeters
- 40% Infill
- No Supports Required (but they help w/ the rear)
- ASA / ABS Filament required
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/linksWant to more directly support my work? Please consider checking out Patreon!: https://www.Patreon.com/MandicReally