Candle Holder Series by Arcforms

Introducing our newest series of candle holder designs, crafted in collaboration with Vector Beam, specialists in laser-cutting files. Together, we've created a unique and elegant set of candle holders that seamlessly blend form and function. The V1 set features four sizes, each designed to accommodate various diameters of flameless tea candles. For precise measurements, please refer to the dimensions section.

We're just getting started! This collection will soon expand with more distinctive designs, aiming to offer a complete and cohesive set of candle holders perfect for 3D printing. – Jurgien, Arcforms Designer

If you need a Commercial License, consider subscribing to our Thangs Membership for exclusive access to premium designs and our growing catalog of 3D-printed home design products.

Important Safety Warning: Do not use real candles with these candle holders. All filament materials are flammable and can pose a fire hazard. These designs are intended exclusively for use with flameless candles.

If you choose to use real candles, you do so entirely at your own risk, and we cannot be held responsible for any damage or injury caused. Always prioritize safety.

Dimensions

The files are fully scalable, allowing you to adjust them to any size you prefer. The four available sizes, along with their corresponding candle area dimensions, are as follows:

Enormous Model: Height: 390 mm (9.8 in) Width: 150 mm (7.5 in) Candle Size: 64mm Large Model: Height: 232 mm (9.8 in) Width: 137 mm (7.5 in) Candle Size: 62mm Medium Model: Height: 130 mm (9.8 in) Width: 100 mm (7.5 in) Candle Size: 44mm Small Model: Height: 82 mm (9.8 in) Width: 92 mm (7.5 in) Candle Size: 39mm

Recommended Settings

•Layer Height: 0.16-0.2mm •Wall Thickness: 1mm More is better to make stronger and more premium final product. You can even go wild and make it solid for even higher quality final product. •Bottom Layers: 2-3 •Infill: 15-25% Grid •Print Speed: 40-60mm/s •Nozzle Size: 0.2-0.4mm •Supports: You will need to use support

Materials

Any material will work just fine but we recommend using White filament shown below:

We recommend (**Polymaker PLA PRO Filament 1.75mm, Tough & High Rigidity White PLA Filament 1.75mm 1kg Cardboard Spool - PolyLite PLA PRO 3D Printer Filament 1.75mm, Print with Most 3D Printers Using (3D Filament)) PLA: Ideal for its ease of use and smooth finish. PETG: If you prefer higher durability and heat resistance.

Print with Most 3D Printers Using (3D Filament))