Heart Love Spinner with magnetic keychain holder.

HeartLove Spinner FV.3mf

Loki Buttons for Cosplay

Loki Buttons 130 Scale.3mf

Battery Tealight Pumpkin Topper.3mf

This is an Electronic/Battery Operated Tealight Candle Topper Only. DO NOT PLACE ON A FLAME 
Great for a quick test print. Less than 4g filament used.
Small enough to only cover the fake flame and light up, great for smaller decorations that can fit almost anywhere.
Notes: Small print only 32 min print time via Prusa Slicer on .2mm layer height and quality setting. 

Inland Spool Adaptor v1, Sovol 3D Dryer.3mf

This is a spool adapter for Inland Brand Filaments that have a cardboard spool rather than the plastic spool. 
Why? This version was designed specifically to allow Inland Filament Spools to fit inside the Sovol 3D Filament Dryer (https://www.sovol3d.com/products/large-filament-dryer-box). 
The pictures show which dryer I designed them to fit, in case the link breaks. 
Note to the wise, while I show the spool adapter on a roll of PETG and that works fine, the filament dryer itself doesn't get over 50C to actually fully dry PETG as advertised lol. All the same, the Adapter also works for the Inland PLA Spools as they are the same size as well. 
Notes:
The Spool Adapter will need to be printed twice as the spools have two sides.
No Supports required.
Better if printed in PETG or similar for the slight bit of flexing required during installation. 
Filament required when printed 100% solid with no brim or skirt: 21G each.
Est Print Time of 1hr 46min with 0.2 layer height on "quality" Prusa Slicer settings.

Installation:  
1. Just line up the adapter with your spool.
2. Press into place in the center of the spool, and then press the outer rim of the spool into the recess that grips it.
3. Do the same process to the other side of the spool.

Humming Bird Base Cover and Changeable Flowers

HBFeeder_Base.3mf

Gingerbread Cactuar 

Gingerbread Cactaur w_Hole for mount.3mf

This Membership gives you access to any of my models you see on Thangs. All Models have been test printed before postings to here, as it should be. 
Members can expect to find a growing list of models that include functional prints as well as purely cosmetic prints. There will be some Cosplay, Kid centered prints, some Tools, and even some Industrial Electronics equipment as well, so it's like my own little bizarre.   
The 2nd tier membership currently is to help support my goal of running my own business. 

Getting Started

All models are 100% tested and working BEFORE posting to the site. All models have been printed in PETG as well to help ensure that more difficult or specialty materials should pose no problems.  Simply download, slice, and print. Any slicing recommendations will be posted with the model as well to further make the user experience as easy and painless as possible. While this is also true on my other membership, this plan will include more models and variations of those models. 

Equal Art (Aequus Ars/Aequus Artem)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships