tracking pixel
Cassocian 7

Humming Bird Base Cover and Changeable Flowers

by
cassocian7
Follow
Follow
Remix Model
cassocian7
cassocian7
|
Image 1 of 3
Humming Bird Base Cover and Changeable Flowers 3d model
cassocian7
cassocian7
|
Image 1 of 3
Humming Bird Base Cover and Changeable Flowers 3d model
2D
3D
Makes
Humming Bird Base Cover and Changeable Flowers 3d model
Humming Bird Base Cover and Changeable Flowers 3d model
Humming Bird Base Cover and Changeable Flowers 3d model
0 Likes4 DownloadsJanuary 10, 2024


Here is a Humming Bird Feeder Base Cover a neighbor asked me to make for them. The original feeder has an old metal cover, which can be seen in the picture, flowers for the feeding holes, and a thin piece of wire the birds could sit on. They requested a better base than a flimsy wire, but still wanted it petite and simplistic. They loved it and now you can too if you have a need for it.

Specs: The inner most circle diameter is 45mm or 1 and 3/4 inches for ease of reference to see if it will work for other applications as well. The 4 feeding holes have an inner diameter of 7mm or 9/32 inches that allow the flowers to simply sit down into them. Depending on your printers clearance abilities/accuracy I have made two flowers that can be used with the base. One utilizes a reasonable fit of 0.2mm, and the other is a full 1mm. Both can be used with 0-rings/glue/your choice of sealing agent. I do recommend using PETG as the material rather than PLA for the Base and Flowers as it's an outdoor print.

Printing Notes: It does require a fair amount of Support Material, so if your supports aren't dialed in it could be tricky. I used a support gap of 0.2mm and had very good luck using Prusa Slicer.

Additional: I am happy to rework any of my designs to fit your needs, please feel free to leave me a message and I'll get to you as quickly as possible. Thank you for looking at my offerings.


0 Likes4 DownloadsJanuary 10, 2024




0 Likes4 DownloadsJanuary 10, 2024